Eutra

SCPI Commands :

[SOURce<HW>]:BB:EUTRa:DUPLexing
[SOURce<HW>]:BB:EUTRa:LINK
[SOURce<HW>]:BB:EUTRa:PRESet
[SOURce<HW>]:BB:EUTRa:SLENgth
[SOURce<HW>]:BB:EUTRa:STATe
[SOURce<HW>]:BB:EUTRa:STDMode
[SOURce<HW>]:BB:EUTRa:SUSLen
[SOURce]:BB:EUTRa:VERSion
class EutraCls[source]

Eutra commands group definition. 1281 total commands, 19 Subgroups, 8 group commands

get_duplexing() → RsSmbv.enums.EutraDuplexMode[source]
# SCPI: [SOURce<HW>]:BB:EUTRa:DUPLexing
value: enums.EutraDuplexMode = driver.source.bb.eutra.get_duplexing()

Sets the duplexing mode.

return

duplexing: TDD| FDD

get_link() → RsSmbv.enums.UpDownDirection[source]
# SCPI: [SOURce<HW>]:BB:EUTRa:LINK
value: enums.UpDownDirection = driver.source.bb.eutra.get_link()

Sets the transmission direction.

return

link: UP| DOWN

get_slength() → int[source]
# SCPI: [SOURce<HW>]:BB:EUTRa:SLENgth
value: int = driver.source.bb.eutra.get_slength()

Sets the sequence length of the signal in number of frames. The signal is calculated in advance and output in the arbitrary waveform generator. The maximum number of frames is calculated as follows: Max. No. of Frames = Arbitrary waveform memory size/(sampling rate x 10 ms) .

return

slength: integer Range: 1 to dynamic

get_state() → bool[source]
# SCPI: [SOURce<HW>]:BB:EUTRa:STATe
value: bool = driver.source.bb.eutra.get_state()

Activates the standard and deactivates all the other digital standards and digital modulation modes in the same path.

return

state: 1| ON| 0| OFF

get_std_mode() → RsSmbv.enums.EutraStdMode[source]
# SCPI: [SOURce<HW>]:BB:EUTRa:STDMode
value: enums.EutraStdMode = driver.source.bb.eutra.get_std_mode()

Sets the supported 3GPP standard.

return

standard_mode: LTE| IOT| LIOT LTE Standalone LTE mode. IoT-specific commands containing the keywords EMTC or NIOT are discarded. IOT Standalone IoT mode. The commands related to LTE-specific features like carrier aggregation or MBSFN are discarded. LIOT Mixed LTE and IoT configuration, for example for interoperability tests.

get_suslen() → int[source]
# SCPI: [SOURce<HW>]:BB:EUTRa:SUSLen
value: int = driver.source.bb.eutra.get_suslen()

Sets the sequence length of the signal in number of subframes. The signal is calculated in advance and output in the arbitrary waveform generator.

return

sub_len: integer Range: 1 to 1E5

get_version() → str[source]
# SCPI: [SOURce]:BB:EUTRa:VERSion
value: str = driver.source.bb.eutra.get_version()

Queries the version of the 3GPP standard underlying the definitions.

return

version: string

preset() → None[source]
# SCPI: [SOURce<HW>]:BB:EUTRa:PRESet
driver.source.bb.eutra.preset()

Sets the parameters of the digital standard to their default values (*RST values specified for the commands) . Not affected is the state set with the command SOURce<hw>:BB:EUTRa:STATe.

preset_with_opc(opc_timeout_ms: int = - 1) → None[source]
# SCPI: [SOURce<HW>]:BB:EUTRa:PRESet
driver.source.bb.eutra.preset_with_opc()

Sets the parameters of the digital standard to their default values (*RST values specified for the commands) . Not affected is the state set with the command SOURce<hw>:BB:EUTRa:STATe.

Same as preset, but waits for the operation to complete before continuing further. Use the RsSmbv.utilities.opc_timeout_set() to set the timeout value.

param opc_timeout_ms

Maximum time to wait in milliseconds, valid only for this call.

set_duplexing(duplexing: RsSmbv.enums.EutraDuplexMode) → None[source]
# SCPI: [SOURce<HW>]:BB:EUTRa:DUPLexing
driver.source.bb.eutra.set_duplexing(duplexing = enums.EutraDuplexMode.FDD)

Sets the duplexing mode.

param duplexing

TDD| FDD

set_link(link: RsSmbv.enums.UpDownDirection) → None[source]
# SCPI: [SOURce<HW>]:BB:EUTRa:LINK
driver.source.bb.eutra.set_link(link = enums.UpDownDirection.DOWN)

Sets the transmission direction.

param link

UP| DOWN

set_slength(slength: int) → None[source]
# SCPI: [SOURce<HW>]:BB:EUTRa:SLENgth
driver.source.bb.eutra.set_slength(slength = 1)

Sets the sequence length of the signal in number of frames. The signal is calculated in advance and output in the arbitrary waveform generator. The maximum number of frames is calculated as follows: Max. No. of Frames = Arbitrary waveform memory size/(sampling rate x 10 ms) .

param slength

integer Range: 1 to dynamic

set_state(state: bool) → None[source]
# SCPI: [SOURce<HW>]:BB:EUTRa:STATe
driver.source.bb.eutra.set_state(state = False)

Activates the standard and deactivates all the other digital standards and digital modulation modes in the same path.

param state

1| ON| 0| OFF

set_std_mode(standard_mode: RsSmbv.enums.EutraStdMode) → None[source]
# SCPI: [SOURce<HW>]:BB:EUTRa:STDMode
driver.source.bb.eutra.set_std_mode(standard_mode = enums.EutraStdMode.IOT)

Sets the supported 3GPP standard.

param standard_mode

LTE| IOT| LIOT LTE Standalone LTE mode. IoT-specific commands containing the keywords EMTC or NIOT are discarded. IOT Standalone IoT mode. The commands related to LTE-specific features like carrier aggregation or MBSFN are discarded. LIOT Mixed LTE and IoT configuration, for example for interoperability tests.

set_suslen(sub_len: int) → None[source]
# SCPI: [SOURce<HW>]:BB:EUTRa:SUSLen
driver.source.bb.eutra.set_suslen(sub_len = 1)

Sets the sequence length of the signal in number of subframes. The signal is calculated in advance and output in the arbitrary waveform generator.

param sub_len

integer Range: 1 to 1E5

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.source.bb.eutra.clone()

Subgroups