Sync

SCPI Commands :

[SOURce<HW>]:BB:EUTRa:DL:SYNC:PPOWer
[SOURce<HW>]:BB:EUTRa:DL:SYNC:PSEQuence
[SOURce<HW>]:BB:EUTRa:DL:SYNC:PSTate
[SOURce<HW>]:BB:EUTRa:DL:SYNC:SPOWer
[SOURce<HW>]:BB:EUTRa:DL:SYNC:SSEQuence
[SOURce<HW>]:BB:EUTRa:DL:SYNC:SSTate
[SOURce<HW>]:BB:EUTRa:DL:SYNC:TXANtenna

class SyncCls[source]

Sync commands group definition. 10 total commands, 1 Subgroups, 7 group commands

get_ppower() → float[source]

# SCPI: [SOURce<HW>]:BB:EUTRa:DL:SYNC:PPOWer
value: float = driver.source.bb.eutra.downlink.sync.get_ppower()

Sets the power of the primary synchronization signal (P-SYNC) .

return

ppower: float Range: -80 to 10

get_psequence() → str[source]

# SCPI: [SOURce<HW>]:BB:EUTRa:DL:SYNC:PSEQuence
value: str = driver.source.bb.eutra.downlink.sync.get_psequence()

No command help available

return

psequence: No help available

get_pstate() → bool[source]

# SCPI: [SOURce<HW>]:BB:EUTRa:DL:SYNC:PSTate
value: bool = driver.source.bb.eutra.downlink.sync.get_pstate()

No command help available

return

psync_state: No help available

get_spower() → float[source]

# SCPI: [SOURce<HW>]:BB:EUTRa:DL:SYNC:SPOWer
value: float = driver.source.bb.eutra.downlink.sync.get_spower()

Sets the power of the secondary synchronization signal (S-SYNC) .

return

spower: float Range: -80 to 10

get_ssequence() → str[source]

# SCPI: [SOURce<HW>]:BB:EUTRa:DL:SYNC:SSEQuence
value: str = driver.source.bb.eutra.downlink.sync.get_ssequence()

No command help available

return

ssequence: No help available

get_sstate() → bool[source]

# SCPI: [SOURce<HW>]:BB:EUTRa:DL:SYNC:SSTate
value: bool = driver.source.bb.eutra.downlink.sync.get_sstate()

No command help available

return

ssync_state: No help available

get_tx_antenna() → RsSmbv.enums.TxAntennaGnss[source]

# SCPI: [SOURce<HW>]:BB:EUTRa:DL:SYNC:TXANtenna
value: enums.TxAntennaGnss = driver.source.bb.eutra.downlink.sync.get_tx_antenna()

Defines on which antenna port the P-/S-SYNC is transmitted. The available values depend on the number of configured antennas.

return

tx_antenna: NONE| ANT1| ANT2| ANT3| ANT4| ALL

set_ppower(ppower: float) → None[source]

# SCPI: [SOURce<HW>]:BB:EUTRa:DL:SYNC:PPOWer
driver.source.bb.eutra.downlink.sync.set_ppower(ppower = 1.0)

Sets the power of the primary synchronization signal (P-SYNC) .

param ppower

float Range: -80 to 10

set_psequence(psequence: str) → None[source]

# SCPI: [SOURce<HW>]:BB:EUTRa:DL:SYNC:PSEQuence
driver.source.bb.eutra.downlink.sync.set_psequence(psequence = 'abc')

No command help available

param psequence

No help available

set_pstate(psync_state: bool) → None[source]

# SCPI: [SOURce<HW>]:BB:EUTRa:DL:SYNC:PSTate
driver.source.bb.eutra.downlink.sync.set_pstate(psync_state = False)

No command help available

param psync_state

No help available

set_spower(spower: float) → None[source]

# SCPI: [SOURce<HW>]:BB:EUTRa:DL:SYNC:SPOWer
driver.source.bb.eutra.downlink.sync.set_spower(spower = 1.0)

Sets the power of the secondary synchronization signal (S-SYNC) .

param spower

float Range: -80 to 10

set_ssequence(ssequence: str) → None[source]

# SCPI: [SOURce<HW>]:BB:EUTRa:DL:SYNC:SSEQuence
driver.source.bb.eutra.downlink.sync.set_ssequence(ssequence = 'abc')

No command help available

param ssequence

No help available

set_sstate(ssync_state: bool) → None[source]

# SCPI: [SOURce<HW>]:BB:EUTRa:DL:SYNC:SSTate
driver.source.bb.eutra.downlink.sync.set_sstate(ssync_state = False)

No command help available

param ssync_state

No help available

set_tx_antenna(tx_antenna: RsSmbv.enums.TxAntennaGnss) → None[source]

# SCPI: [SOURce<HW>]:BB:EUTRa:DL:SYNC:TXANtenna
driver.source.bb.eutra.downlink.sync.set_tx_antenna(tx_antenna = enums.TxAntennaGnss.ALL)

Defines on which antenna port the P-/S-SYNC is transmitted. The available values depend on the number of configured antennas.

param tx_antenna

NONE| ANT1| ANT2| ANT3| ANT4| ALL

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.source.bb.eutra.downlink.sync.clone()

Subgroups

Niot