Arbitrary

SCPI Commands :

[SOURce<HW>]:BB:ARBitrary:PRESet
[SOURce<HW>]:BB:ARBitrary:STATe
Commands in total: 147
Subgroups: 10
Direct child commands: 2
get_state() → bool[source]
# [SOURce<HW>]:BB:ARBitrary:STATe
value: bool = driver.source.bb.arbitrary.get_state()

Enables the ARB generator. A waveform must be selected before the ARB generator is activated.

Returns:

state: 1 | ON | 0| OFF

preset() → None[source]
# [SOURce<HW>]:BB:ARBitrary:PRESet
driver.source.bb.arbitrary.preset()

Sets all ARB generator parameters to their default values.

preset_with_opc(opc_timeout_ms: int = -1) → None[source]
# [SOURce<HW>]:BB:ARBitrary:PRESet
driver.source.bb.arbitrary.preset_with_opc()

Sets all ARB generator parameters to their default values.

Same as preset, but waits for the operation to complete before continuing further. Use the RsSmbv.utilities.opc_timeout_set() to set the timeout value.

Parameters:

opc_timeout_ms – Maximum time to wait in milliseconds, valid only for this call.

set_state(state: bool) → None[source]
# [SOURce<HW>]:BB:ARBitrary:STATe
driver.source.bb.arbitrary.set_state(state = False)

Enables the ARB generator. A waveform must be selected before the ARB generator is activated.

Parameters:

state – 1 | ON | 0| OFF

Cloning the Group

# Create a copy of the original group, that exists independently
arbitrary_copy = driver.source.bb.arbitrary.clone()

Subgroups