FhFlag

SCPI Command :

[SOURce<HW>]:BB:EUTRa:UL:UE<ST>:SL:SCI<CH0>:FHFLag

class FhFlagCls[source]

FhFlag commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(userEquipment=UserEquipment.Default, indexNull=IndexNull.Default) → bool[source]

# SCPI: [SOURce<HW>]:BB:EUTRa:UL:UE<ST>:SL:SCI<CH0>:FHFLag
value: bool = driver.source.bb.eutra.uplink.ue.sl.sci.fhFlag.get(userEquipment = repcap.UserEquipment.Default, indexNull = repcap.IndexNull.Default)

Sets the DCI field frequency hopping flag. If enabled, frequency hopping is used for the PSSCH transmission.

param userEquipment

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Ue’)

param indexNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Sci’)

return

sl_freq_hopping: 1| ON| 0| OFF

set(sl_freq_hopping: bool, userEquipment=UserEquipment.Default, indexNull=IndexNull.Default) → None[source]

# SCPI: [SOURce<HW>]:BB:EUTRa:UL:UE<ST>:SL:SCI<CH0>:FHFLag
driver.source.bb.eutra.uplink.ue.sl.sci.fhFlag.set(sl_freq_hopping = False, userEquipment = repcap.UserEquipment.Default, indexNull = repcap.IndexNull.Default)

Sets the DCI field frequency hopping flag. If enabled, frequency hopping is used for the PSSCH transmission.

param sl_freq_hopping

1| ON| 0| OFF

param userEquipment

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Ue’)

param indexNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Sci’)