Plci

SCPI Commands :

[SOURce<HW>]:BB:EUTRa:UL:[PLCI]:CID
[SOURce<HW>]:BB:EUTRa:UL:[PLCI]:CIDGroup
[SOURce<HW>]:BB:EUTRa:UL:[PLCI]:PLID
class PlciCls[source]

Plci commands group definition. 3 total commands, 0 Subgroups, 3 group commands

get_cid() int[source]
# SCPI: [SOURce<HW>]:BB:EUTRa:UL:[PLCI]:CID
value: int = driver.source.bb.eutra.uplink.plci.get_cid()

Sets the cell identity.

return

cell_id: integer Range: 0 to 503

get_cid_group() int[source]
# SCPI: [SOURce<HW>]:BB:EUTRa:UL:[PLCI]:CIDGroup
value: int = driver.source.bb.eutra.uplink.plci.get_cid_group()

Sets the ID of the physical cell identity group.

return

phys_cell_id_group: integer Range: 0 to 167

get_plid() int[source]
# SCPI: [SOURce<HW>]:BB:EUTRa:UL:[PLCI]:PLID
value: int = driver.source.bb.eutra.uplink.plci.get_plid()

Sets the identity of the physical layer within the selected physical cell identity group, set with the command [:SOURce<hw>]:BB:EUTRa:UL[:PLCI]:CIDGroup.

return

physical_layer_id: integer Range: 0 to 2

set_cid(cell_id: int) None[source]
# SCPI: [SOURce<HW>]:BB:EUTRa:UL:[PLCI]:CID
driver.source.bb.eutra.uplink.plci.set_cid(cell_id = 1)

Sets the cell identity.

param cell_id

integer Range: 0 to 503

set_cid_group(phys_cell_id_group: int) None[source]
# SCPI: [SOURce<HW>]:BB:EUTRa:UL:[PLCI]:CIDGroup
driver.source.bb.eutra.uplink.plci.set_cid_group(phys_cell_id_group = 1)

Sets the ID of the physical cell identity group.

param phys_cell_id_group

integer Range: 0 to 167

set_plid(physical_layer_id: int) None[source]
# SCPI: [SOURce<HW>]:BB:EUTRa:UL:[PLCI]:PLID
driver.source.bb.eutra.uplink.plci.set_plid(physical_layer_id = 1)

Sets the identity of the physical layer within the selected physical cell identity group, set with the command [:SOURce<hw>]:BB:EUTRa:UL[:PLCI]:CIDGroup.

param physical_layer_id

integer Range: 0 to 2