NzsfOffset

SCPI Command :

[SOURce<HW>]:BB:EUTRa:DL:DRS:CELL<CH0>:CSIRs<ST>:NZSFoffset

class NzsfOffsetCls[source]

NzsfOffset commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(cellNull=CellNull.Default, csiRefSignal=CsiRefSignal.Default) → int[source]

# SCPI: [SOURce<HW>]:BB:EUTRa:DL:DRS:CELL<CH0>:CSIRs<ST>:NZSFoffset
value: int = driver.source.bb.eutra.downlink.drs.cell.csirs.nzsfOffset.get(cellNull = repcap.CellNull.Default, csiRefSignal = repcap.CsiRefSignal.Default)

Queries the subframe offset between the SSS and the CSI-RS in a DRS.

param cellNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cell’)

param csiRefSignal

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Csirs’)

return

non_zero_psf_offs: integer Range: 0 to 4

set(non_zero_psf_offs: int, cellNull=CellNull.Default, csiRefSignal=CsiRefSignal.Default) → None[source]

# SCPI: [SOURce<HW>]:BB:EUTRa:DL:DRS:CELL<CH0>:CSIRs<ST>:NZSFoffset
driver.source.bb.eutra.downlink.drs.cell.csirs.nzsfOffset.set(non_zero_psf_offs = 1, cellNull = repcap.CellNull.Default, csiRefSignal = repcap.CsiRefSignal.Default)

Queries the subframe offset between the SSS and the CSI-RS in a DRS.

param non_zero_psf_offs

integer Range: 0 to 4

param cellNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cell’)

param csiRefSignal

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Csirs’)