Is2

SCPI Commands :

[SOURce<HW>]:BB:EUTRa:TCW:IS2:CHBW
[SOURce<HW>]:BB:EUTRa:TCW:IS2:CLID
[SOURce<HW>]:BB:EUTRa:TCW:IS2:DUPLex
[SOURce<HW>]:BB:EUTRa:TCW:IS2:IFTYpe
[SOURce<HW>]:BB:EUTRa:TCW:IS2:ORTCover
[SOURce<HW>]:BB:EUTRa:TCW:IS2:PLEVel
[SOURce<HW>]:BB:EUTRa:TCW:IS2:PRCOndition
[SOURce<HW>]:BB:EUTRa:TCW:IS2:RFFRequency
[SOURce<HW>]:BB:EUTRa:TCW:IS2:UEID

class Is2Cls[source]

Is2 commands group definition. 9 total commands, 0 Subgroups, 9 group commands

get_chbw() → RsSmbv.enums.EutraTcwcHanBw[source]

# SCPI: [SOURce<HW>]:BB:EUTRa:TCW:IS2:CHBW
value: enums.EutraTcwcHanBw = driver.source.bb.eutra.tcw.is2.get_chbw()

Queries the channel bandwidth of the interfering signal in MHz: 20, 10, 5, 3, 1.4, 15, or 0.2 MHz.

return

channel_bandwidth: BW20_00| BW10_00| BW5_00| BW3_00| BW1_40| BW15_00| BW00_20

get_clid() → int[source]

# SCPI: [SOURce<HW>]:BB:EUTRa:TCW:IS2:CLID
value: int = driver.source.bb.eutra.tcw.is2.get_clid()

No command help available

return

is_2_cellid: No help available

get_duplex() → RsSmbv.enums.EutraDuplexMode[source]

# SCPI: [SOURce<HW>]:BB:EUTRa:TCW:IS2:DUPLex
value: enums.EutraDuplexMode = driver.source.bb.eutra.tcw.is2.get_duplex()

Selects whether TDD or FDD duplexing mode is used.

return

duplexing: No help available

get_if_type() → RsSmbv.enums.EutraTcwInterfType[source]

# SCPI: [SOURce<HW>]:BB:EUTRa:TCW:IS2:IFTYpe
value: enums.EutraTcwInterfType = driver.source.bb.eutra.tcw.is2.get_if_type()


    INTRO_CMD_HELP: Selects the type of the interfering signal:

    - For Blocking tests, the interfering signal can be an in-band EUTRA/LTE signal (EUTra) or out-of-band CW signal (CW) .
    - For Receiver Intermodulation tests, the first interfering signal can be an EUTRA/LTE signal (EUTra) or narrowband EUTRA signal (NEUTra) . The second interfering signal is always a CW signal (CW) .

    :return: interferer_type: NEUTra| EUTra| CW| UTRA

get_ort_cover() → int[source]

# SCPI: [SOURce<HW>]:BB:EUTRa:TCW:IS2:ORTCover
value: int = driver.source.bb.eutra.tcw.is2.get_ort_cover()

No command help available

return

ortho_cover: No help available

get_plevel() → str[source]

# SCPI: [SOURce<HW>]:BB:EUTRa:TCW:IS2:PLEVel
value: str = driver.source.bb.eutra.tcw.is2.get_plevel()

Queries the power level of the interfering signal.

return

power_level: string

get_pr_condition() → RsSmbv.enums.EutraTcwPropagCond[source]

# SCPI: [SOURce<HW>]:BB:EUTRa:TCW:IS2:PRCOndition
value: enums.EutraTcwPropagCond = driver.source.bb.eutra.tcw.is2.get_pr_condition()

No command help available

return

propagation_condition: No help available

get_rf_frequency() → int[source]

# SCPI: [SOURce<HW>]:BB:EUTRa:TCW:IS2:RFFRequency
value: int = driver.source.bb.eutra.tcw.is2.get_rf_frequency()

Queries the center frequency of the interfering signal.

return

rf_frequency: integer Range: 100E3 to 6E9

get_ue_id() → int[source]

# SCPI: [SOURce<HW>]:BB:EUTRa:TCW:IS2:UEID
value: int = driver.source.bb.eutra.tcw.is2.get_ue_id()

No command help available

return

is_2_ueid: No help available

set_duplex(duplexing: RsSmbv.enums.EutraDuplexMode) → None[source]

# SCPI: [SOURce<HW>]:BB:EUTRa:TCW:IS2:DUPLex
driver.source.bb.eutra.tcw.is2.set_duplex(duplexing = enums.EutraDuplexMode.FDD)

Selects whether TDD or FDD duplexing mode is used.

param duplexing

TDD| FDD

set_rf_frequency(rf_frequency: int) → None[source]

# SCPI: [SOURce<HW>]:BB:EUTRa:TCW:IS2:RFFRequency
driver.source.bb.eutra.tcw.is2.set_rf_frequency(rf_frequency = 1)

Queries the center frequency of the interfering signal.

param rf_frequency

integer Range: 100E3 to 6E9

set_ue_id(is_2_ueid: int) → None[source]

# SCPI: [SOURce<HW>]:BB:EUTRa:TCW:IS2:UEID
driver.source.bb.eutra.tcw.is2.set_ue_id(is_2_ueid = 1)

No command help available

param is_2_ueid

No help available