NzqOffset

SCPI Command :

[SOURce<HW>]:BB:EUTRa:DL:DRS:CELL<CH0>:CSIRs<ST>:NZQoffset

class NzqOffsetCls[source]

NzqOffset commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(cellNull=CellNull.Default, csiRefSignal=CsiRefSignal.Default) → int[source]

# SCPI: [SOURce<HW>]:BB:EUTRa:DL:DRS:CELL<CH0>:CSIRs<ST>:NZQoffset
value: int = driver.source.bb.eutra.downlink.drs.cell.csirs.nzqOffset.get(cellNull = repcap.CellNull.Default, csiRefSignal = repcap.CsiRefSignal.Default)

Sets the Q-offset.

param cellNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cell’)

param csiRefSignal

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Csirs’)

return

non_zero_pq_offs: -24| -22| -20| -18| -16| -14| -12| -10| -8| -6| -5| -4| -3| -2| -1| 0| 1| 2| 3| 4| 5| 6| 8| 10| 12| 14| 16| 18| 20| 22| 24 Positive values outside the permitted discrete values are rounded down; negative values are rounded up.

set(non_zero_pq_offs: int, cellNull=CellNull.Default, csiRefSignal=CsiRefSignal.Default) → None[source]

# SCPI: [SOURce<HW>]:BB:EUTRa:DL:DRS:CELL<CH0>:CSIRs<ST>:NZQoffset
driver.source.bb.eutra.downlink.drs.cell.csirs.nzqOffset.set(non_zero_pq_offs = 1, cellNull = repcap.CellNull.Default, csiRefSignal = repcap.CsiRefSignal.Default)

Sets the Q-offset.

param non_zero_pq_offs

-24| -22| -20| -18| -16| -14| -12| -10| -8| -6| -5| -4| -3| -2| -1| 0| 1| 2| 3| 4| 5| 6| 8| 10| 12| 14| 16| 18| 20| 22| 24 Positive values outside the permitted discrete values are rounded down; negative values are rounded up.

param cellNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cell’)

param csiRefSignal

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Csirs’)