Nr5G

SCPI Commands :

[SOURce<HW>]:BB:NR5G:LINK
[SOURce<HW>]:BB:NR5G:MAPCoord
[SOURce]:BB:NR5G:PLVersion
[SOURce<HW>]:BB:NR5G:PRESet
[SOURce<HW>]:BB:NR5G:SIMPle
[SOURce<HW>]:BB:NR5G:STATe
[SOURce]:BB:NR5G:VERSion
class Nr5GCls[source]

Nr5G commands group definition. 1461 total commands, 27 Subgroups, 7 group commands

get_link() → RsSmbv.enums.LinkDir2[source]
# SCPI: [SOURce<HW>]:BB:NR5G:LINK
value: enums.LinkDir2 = driver.source.bb.nr5G.get_link()

Selects the transmission direction.

return

link_dir: DOWN | SIDE | UP DOWN Selects downlink direction. SIDE Selects sidelink direction. Requires Option: R&S SMBVB-K170 UP Selects downlink direction.

get_map_coord() → RsSmbv.enums.CoordMapMode[source]
# SCPI: [SOURce<HW>]:BB:NR5G:MAPCoord
value: enums.CoordMapMode = driver.source.bb.nr5G.get_map_coord()

No command help available

return

coord_map_mode: No help available

get_pl_version() → str[source]
# SCPI: [SOURce]:BB:NR5G:PLVersion
value: str = driver.source.bb.nr5G.get_pl_version()

Queries the installed version of the 5G New Radio application.

return

plugin_version: string

get_simple() → bool[source]
# SCPI: [SOURce<HW>]:BB:NR5G:SIMPle
value: bool = driver.source.bb.nr5G.get_simple()

Turns the simple mode of the user interface on and off.

return

state: 1| ON| 0| OFF

get_state() → bool[source]
# SCPI: [SOURce<HW>]:BB:NR5G:STATe
value: bool = driver.source.bb.nr5G.get_state()

Activates the standard and deactivates all the other digital standards and digital modulation modes in the same path.

return

state: 1| ON| 0| OFF

get_version() → str[source]
# SCPI: [SOURce]:BB:NR5G:VERSion
value: str = driver.source.bb.nr5G.get_version()

Queries the version of the 3GPP standard underlying the definitions.

return

version: string

preset() → None[source]
# SCPI: [SOURce<HW>]:BB:NR5G:PRESet
driver.source.bb.nr5G.preset()

Sets the parameters of the digital standard to their default values (*RST values specified for the commands) . Not affected is the state set with the command SOURce<hw>:BB:NR5G:STATe.

preset_with_opc(opc_timeout_ms: int = - 1) → None[source]
# SCPI: [SOURce<HW>]:BB:NR5G:PRESet
driver.source.bb.nr5G.preset_with_opc()

Sets the parameters of the digital standard to their default values (*RST values specified for the commands) . Not affected is the state set with the command SOURce<hw>:BB:NR5G:STATe.

Same as preset, but waits for the operation to complete before continuing further. Use the RsSmbv.utilities.opc_timeout_set() to set the timeout value.

param opc_timeout_ms

Maximum time to wait in milliseconds, valid only for this call.

set_link(link_dir: RsSmbv.enums.LinkDir2) → None[source]
# SCPI: [SOURce<HW>]:BB:NR5G:LINK
driver.source.bb.nr5G.set_link(link_dir = enums.LinkDir2.DOWN)

Selects the transmission direction.

param link_dir

DOWN | SIDE | UP DOWN Selects downlink direction. SIDE Selects sidelink direction. Requires Option: R&S SMBVB-K170 UP Selects downlink direction.

set_map_coord(coord_map_mode: RsSmbv.enums.CoordMapMode) → None[source]
# SCPI: [SOURce<HW>]:BB:NR5G:MAPCoord
driver.source.bb.nr5G.set_map_coord(coord_map_mode = enums.CoordMapMode.CARTesian)

No command help available

param coord_map_mode

No help available

set_simple(state: bool) → None[source]
# SCPI: [SOURce<HW>]:BB:NR5G:SIMPle
driver.source.bb.nr5G.set_simple(state = False)

Turns the simple mode of the user interface on and off.

param state

1| ON| 0| OFF

set_state(state: bool) → None[source]
# SCPI: [SOURce<HW>]:BB:NR5G:STATe
driver.source.bb.nr5G.set_state(state = False)

Activates the standard and deactivates all the other digital standards and digital modulation modes in the same path.

param state

1| ON| 0| OFF

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.source.bb.nr5G.clone()

Subgroups