C2K

SCPI Commands :

[SOURce<HW>]:BB:C2K:LINK
[SOURce<HW>]:BB:C2K:PRESet
[SOURce<HW>]:BB:C2K:SLENgth
[SOURce<HW>]:BB:C2K:STATe
[SOURce]:BB:C2K:VERSion
class C2KCls[source]

C2K commands group definition. 146 total commands, 13 Subgroups, 5 group commands

get_link() → RsSmbv.enums.LinkDir[source]
# SCPI: [SOURce<HW>]:BB:C2K:LINK
value: enums.LinkDir = driver.source.bb.c2K.get_link()

The command defines the transmission direction. The signal either corresponds to that of a base station (FORWard | DOWN) or that of a mobile station (REVerse | UP) .

return

link: DOWN| UP| FORWard| REVerse

get_slength() → int[source]
# SCPI: [SOURce<HW>]:BB:C2K:SLENgth
value: int = driver.source.bb.c2K.get_slength()

Sets the sequence length of the arbitrary waveform component of the CDMA2000 signal in the number of frames.

return

slength: integer Range: 1 to max

get_state() → bool[source]
# SCPI: [SOURce<HW>]:BB:C2K:STATe
value: bool = driver.source.bb.c2K.get_state()

Activates the standard and deactivates all the other digital standards and digital modulation modes in the same path.

return

state: 1| ON| 0| OFF

get_version() → str[source]
# SCPI: [SOURce]:BB:C2K:VERSion
value: str = driver.source.bb.c2K.get_version()

The command queries the version of the CDMA standard underlying the definitions.

return

version: string

preset() → None[source]
# SCPI: [SOURce<HW>]:BB:C2K:PRESet
driver.source.bb.c2K.preset()

Sets the parameters of the digital standard to their default values (*RST values specified for the commands) . Not affected is the state set with the command SOURce<hw>:BB:C2K:STATe.

preset_with_opc(opc_timeout_ms: int = - 1) → None[source]
# SCPI: [SOURce<HW>]:BB:C2K:PRESet
driver.source.bb.c2K.preset_with_opc()

Sets the parameters of the digital standard to their default values (*RST values specified for the commands) . Not affected is the state set with the command SOURce<hw>:BB:C2K:STATe.

Same as preset, but waits for the operation to complete before continuing further. Use the RsSmbv.utilities.opc_timeout_set() to set the timeout value.

param opc_timeout_ms

Maximum time to wait in milliseconds, valid only for this call.

set_link(link: RsSmbv.enums.LinkDir) → None[source]
# SCPI: [SOURce<HW>]:BB:C2K:LINK
driver.source.bb.c2K.set_link(link = enums.LinkDir.DOWN)

The command defines the transmission direction. The signal either corresponds to that of a base station (FORWard | DOWN) or that of a mobile station (REVerse | UP) .

param link

DOWN| UP| FORWard| REVerse

set_slength(slength: int) → None[source]
# SCPI: [SOURce<HW>]:BB:C2K:SLENgth
driver.source.bb.c2K.set_slength(slength = 1)

Sets the sequence length of the arbitrary waveform component of the CDMA2000 signal in the number of frames.

param slength

integer Range: 1 to max

set_state(state: bool) → None[source]
# SCPI: [SOURce<HW>]:BB:C2K:STATe
driver.source.bb.c2K.set_state(state = False)

Activates the standard and deactivates all the other digital standards and digital modulation modes in the same path.

param state

1| ON| 0| OFF

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.source.bb.c2K.clone()

Subgroups