Mccw

SCPI Commands :

[SOURce<HW>]:BB:MCCW:PRESet
[SOURce<HW>]:BB:MCCW:STATe

class MccwCls

Mccw commands group definition. 46 total commands, 5 Subgroups, 2 group commands

get_state() → bool

# SCPI: [SOURce<HW>]:BB:MCCW:STATe
value: bool = driver.source.bb.mccw.get_state()

Enables/disables the multi carrier CW signal.

return

state: 1| ON| 0| OFF

preset() → None

# SCPI: [SOURce<HW>]:BB:MCCW:PRESet
driver.source.bb.mccw.preset()

Sets all multi carrier signal parameters to their default values.

preset_with_opc(opc_timeout_ms: int = - 1) → None

# SCPI: [SOURce<HW>]:BB:MCCW:PRESet
driver.source.bb.mccw.preset_with_opc()

Sets all multi carrier signal parameters to their default values.

Same as preset, but waits for the operation to complete before continuing further. Use the RsSmbv.utilities.opc_timeout_set() to set the timeout value.

param opc_timeout_ms

Maximum time to wait in milliseconds, valid only for this call.

set_state(state: bool) → None

# SCPI: [SOURce<HW>]:BB:MCCW:STATe
driver.source.bb.mccw.set_state(state = False)

Enables/disables the multi carrier CW signal.

param state

1| ON| 0| OFF

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.source.bb.mccw.clone()

Subgroups

• Carrier
  • ListPy
    • Phase
    • Power
    • State
  • Phase
  • Power
  • State
• Cfactor
• Clock
  • Synchronization
    • Execute
• Edit
  • Carrier
    • Execute
    • Phase
    • Power
• Trigger
  • Arm
    • Execute
  • Execute
  • External<External>
    • Delay
    • Inhibit
    • Synchronize
  • Output<Output>
    • Delay
    • Mode
    • OffTime
    • Ontime
    • Pattern
    • Pulse
      • Divider
      • Frequency
  • Time
    • Date
    • Time