State

SCPI Command :

[SOURce<HW>]:BB:EUTRa:UL:UE<ST>:PRACh:SUBF<CH0>:STATe

class StateCls

State commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(userEquipment=UserEquipment.Default, subframeNull=SubframeNull.Default) → bool

# SCPI: [SOURce<HW>]:BB:EUTRa:UL:UE<ST>:PRACh:SUBF<CH0>:STATe
value: bool = driver.source.bb.eutra.uplink.ue.prach.subf.state.get(userEquipment = repcap.UserEquipment.Default, subframeNull = repcap.SubframeNull.Default)

Enables/disables the PRACH for the selected subframe. The subframes available for configuration depend on the selected PRACH configuration.

param userEquipment

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Ue’)

param subframeNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Subf’)

return

state: 1| ON| 0| OFF

set(state: bool, userEquipment=UserEquipment.Default, subframeNull=SubframeNull.Default) → None

# SCPI: [SOURce<HW>]:BB:EUTRa:UL:UE<ST>:PRACh:SUBF<CH0>:STATe
driver.source.bb.eutra.uplink.ue.prach.subf.state.set(state = False, userEquipment = repcap.UserEquipment.Default, subframeNull = repcap.SubframeNull.Default)

Enables/disables the PRACH for the selected subframe. The subframes available for configuration depend on the selected PRACH configuration.

param state

1| ON| 0| OFF

param userEquipment

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Ue’)

param subframeNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Subf’)