NcsConf

SCPI Command :

[SOURce<HW>]:BB:EUTRa:UL:UE<ST>:PRACh:SUBF<CH0>:NCSConf

class NcsConfCls[source]

NcsConf commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(userEquipment=UserEquipment.Default, subframeNull=SubframeNull.Default) → int[source]

# SCPI: [SOURce<HW>]:BB:EUTRa:UL:UE<ST>:PRACh:SUBF<CH0>:NCSConf
value: int = driver.source.bb.eutra.uplink.ue.prach.subf.ncsConf.get(userEquipment = repcap.UserEquipment.Default, subframeNull = repcap.SubframeNull.Default)

Selects the Ncs configuration of the selected subframe.

param userEquipment

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Ue’)

param subframeNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Subf’)

return

ncs_config: integer For details on the value range, see Table ‘Value range Ncs configuration’. Range: 0 to 15

set(ncs_config: int, userEquipment=UserEquipment.Default, subframeNull=SubframeNull.Default) → None[source]

# SCPI: [SOURce<HW>]:BB:EUTRa:UL:UE<ST>:PRACh:SUBF<CH0>:NCSConf
driver.source.bb.eutra.uplink.ue.prach.subf.ncsConf.set(ncs_config = 1, userEquipment = repcap.UserEquipment.Default, subframeNull = repcap.SubframeNull.Default)

Selects the Ncs configuration of the selected subframe.

param ncs_config

integer For details on the value range, see Table ‘Value range Ncs configuration’. Range: 0 to 15

param userEquipment

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Ue’)

param subframeNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Subf’)