Subframe<SubframeNull>

RepCap Settings

# Range: Nr0 .. Nr200
rc = driver.source.bb.eutra.uplink.emtc.valid.subframe.repcap_subframeNull_get()
driver.source.bb.eutra.uplink.emtc.valid.subframe.repcap_subframeNull_set(repcap.SubframeNull.Nr0)

SCPI Command :

[SOURce<HW>]:BB:EUTRa:UL:EMTC:VALid:SUBFrame<DIR>

class SubframeCls

Subframe commands group definition. 1 total commands, 0 Subgroups, 1 group commands Repeated Capability: SubframeNull, default value after init: SubframeNull.Nr0

get(subframeNull=SubframeNull.Default) → bool

# SCPI: [SOURce<HW>]:BB:EUTRa:UL:EMTC:VALid:SUBFrame<DIR>
value: bool = driver.source.bb.eutra.uplink.emtc.valid.subframe.get(subframeNull = repcap.SubframeNull.Default)

Sets a subframe as valid and used for eMTC transmission.

param subframeNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Subframe’)

return

valid_sub_frames: 1| ON| 0| OFF

set(valid_sub_frames: bool, subframeNull=SubframeNull.Default) → None

# SCPI: [SOURce<HW>]:BB:EUTRa:UL:EMTC:VALid:SUBFrame<DIR>
driver.source.bb.eutra.uplink.emtc.valid.subframe.set(valid_sub_frames = False, subframeNull = repcap.SubframeNull.Default)

Sets a subframe as valid and used for eMTC transmission.

param valid_sub_frames

1| ON| 0| OFF

param subframeNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Subframe’)

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.source.bb.eutra.uplink.emtc.valid.subframe.clone()