Power

SCPI Command :

[SOURce<HW>]:BB:EUTRa:UL:UE<ST>:PRACh:SUBF<CH0>:POWer
class PowerCls[source]

Power commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(userEquipment=UserEquipment.Default, subframeNull=SubframeNull.Default) float[source]
# SCPI: [SOURce<HW>]:BB:EUTRa:UL:UE<ST>:PRACh:SUBF<CH0>:POWer
value: float = driver.source.bb.eutra.uplink.ue.prach.subf.power.get(userEquipment = repcap.UserEquipment.Default, subframeNull = repcap.SubframeNull.Default)

Sets the PRACH power relative to the UE power. The PRACH power can be adjusted independently for every configured preamble.

param userEquipment

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Ue’)

param subframeNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Subf’)

return

power: float Range: -80 to 10

set(power: float, userEquipment=UserEquipment.Default, subframeNull=SubframeNull.Default) None[source]
# SCPI: [SOURce<HW>]:BB:EUTRa:UL:UE<ST>:PRACh:SUBF<CH0>:POWer
driver.source.bb.eutra.uplink.ue.prach.subf.power.set(power = 1.0, userEquipment = repcap.UserEquipment.Default, subframeNull = repcap.SubframeNull.Default)

Sets the PRACH power relative to the UE power. The PRACH power can be adjusted independently for every configured preamble.

param power

float Range: -80 to 10

param userEquipment

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Ue’)

param subframeNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Subf’)