NcsConf

SCPI Command :

[SOURce<HW>]:BB:EUTRa:UL:UE<ST>:PRACh:ATT<CH0>:EMTC:NCSConf

class NcsConfCls[source]

NcsConf commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(userEquipment=UserEquipment.Default, attenuationNull=AttenuationNull.Default) → int[source]

# SCPI: [SOURce<HW>]:BB:EUTRa:UL:UE<ST>:PRACh:ATT<CH0>:EMTC:NCSConf
value: int = driver.source.bb.eutra.uplink.ue.prach.att.emtc.ncsConf.get(userEquipment = repcap.UserEquipment.Default, attenuationNull = repcap.AttenuationNull.Default)

Selects the Ncs configuration.

param userEquipment

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Ue’)

param attenuationNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Att’)

return

ncs_config: integer For detail on the value range, see Table ‘Value range Ncs configuration’. Range: 0 to 15

set(ncs_config: int, userEquipment=UserEquipment.Default, attenuationNull=AttenuationNull.Default) → None[source]

# SCPI: [SOURce<HW>]:BB:EUTRa:UL:UE<ST>:PRACh:ATT<CH0>:EMTC:NCSConf
driver.source.bb.eutra.uplink.ue.prach.att.emtc.ncsConf.set(ncs_config = 1, userEquipment = repcap.UserEquipment.Default, attenuationNull = repcap.AttenuationNull.Default)

Selects the Ncs configuration.

param ncs_config

integer For detail on the value range, see Table ‘Value range Ncs configuration’. Range: 0 to 15

param userEquipment

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Ue’)

param attenuationNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Att’)