Row<RowNull>

RepCap Settings

# Range: Nr0 .. Nr31
rc = driver.source.bb.eutra.uplink.ue.apMap.ap1000Map.row.repcap_rowNull_get()
driver.source.bb.eutra.uplink.ue.apMap.ap1000Map.row.repcap_rowNull_set(repcap.RowNull.Nr0)

SCPI Command :

[SOURce<HW>]:BB:EUTRa:UL:UE<ST>:APMap:AP1000Map:ROW<BBID>
class RowCls[source]

Row commands group definition. 1 total commands, 0 Subgroups, 1 group commands Repeated Capability: RowNull, default value after init: RowNull.Nr0

get(userEquipment=UserEquipment.Default, rowNull=RowNull.Default) bool[source]
# SCPI: [SOURce<HW>]:BB:EUTRa:UL:UE<ST>:APMap:AP1000Map:ROW<BBID>
value: bool = driver.source.bb.eutra.uplink.ue.apMap.ap1000Map.row.get(userEquipment = repcap.UserEquipment.Default, rowNull = repcap.RowNull.Default)

Sets which antenna port will be generated by which baseband.

param userEquipment

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Ue’)

param rowNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Row’)

return

ant_port_mapping: 1| ON| 0| OFF

set(ant_port_mapping: bool, userEquipment=UserEquipment.Default, rowNull=RowNull.Default) None[source]
# SCPI: [SOURce<HW>]:BB:EUTRa:UL:UE<ST>:APMap:AP1000Map:ROW<BBID>
driver.source.bb.eutra.uplink.ue.apMap.ap1000Map.row.set(ant_port_mapping = False, userEquipment = repcap.UserEquipment.Default, rowNull = repcap.RowNull.Default)

Sets which antenna port will be generated by which baseband.

param ant_port_mapping

1| ON| 0| OFF

param userEquipment

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Ue’)

param rowNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Row’)

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.source.bb.eutra.uplink.ue.apMap.ap1000Map.row.clone()