Gs

SCPI Commands :

[SOURce<HW>]:BB:EUTRa:TCW:GS:ANTSubset
[SOURce<HW>]:BB:EUTRa:TCW:GS:BSCLass
[SOURce<HW>]:BB:EUTRa:TCW:GS:GENSignals
[SOURce<HW>]:BB:EUTRa:TCW:GS:INSTsetup
[SOURce<HW>]:BB:EUTRa:TCW:GS:MARKerconfig
[SOURce<HW>]:BB:EUTRa:TCW:GS:MODE
[SOURce<HW>]:BB:EUTRa:TCW:GS:OPTion
[SOURce<HW>]:BB:EUTRa:TCW:GS:RELease
[SOURce<HW>]:BB:EUTRa:TCW:GS:RXANtennas
[SOURce<HW>]:BB:EUTRa:TCW:GS:SIGRout
[SOURce<HW>]:BB:EUTRa:TCW:GS:SPEC
[SOURce<HW>]:BB:EUTRa:TCW:GS:STC
[SOURce<HW>]:BB:EUTRa:TCW:GS:TRIGgerconfig
[SOURce<HW>]:BB:EUTRa:TCW:GS:TXANtennas

Commands in total: 14

Subgroups: 0

Direct child commands: 14

get_ant_subset() → EutraTcwaNtSubset

# [SOURce<HW>]:BB:EUTRa:TCW:GS:ANTSubset
value: enums.EutraTcwaNtSubset = driver.source.bb.eutra.tcw.gs.get_ant_subset()

No help available

get_bs_class() → UtraTcwbSclass

# [SOURce<HW>]:BB:EUTRa:TCW:GS:BSCLass
value: enums.UtraTcwbSclass = driver.source.bb.eutra.tcw.gs.get_bs_class()

Sets the base station class.

Returns:

bs_class: WIDE | LOCal | HOME | MEDium

get_gen_signals() → EutraTcwGeneratedSig

# [SOURce<HW>]:BB:EUTRa:TCW:GS:GENSignals
value: enums.EutraTcwGeneratedSig = driver.source.bb.eutra.tcw.gs.get_gen_signals()

No help available

get_inst_setup() → EutraTcwiNstSetup

# [SOURce<HW>]:BB:EUTRa:TCW:GS:INSTsetup
value: enums.EutraTcwiNstSetup = driver.source.bb.eutra.tcw.gs.get_inst_setup()

No help available

get_marker_config() → EutraTcwMarkConf

# [SOURce<HW>]:BB:EUTRa:TCW:GS:MARKerconfig
value: enums.EutraTcwMarkConf = driver.source.bb.eutra.tcw.gs.get_marker_config()

Selects the marker configuration. The marker can be used to synchronize the measuring equipment to the signal generator.

Returns:

marker_config: UNCHanged | FRAMe FRAMe The marker settings are customized for the selected test case. ‘Radio Frame Start’ markers are output; the marker delays are set equal to zero. UNCHanged The current marker settings of the signal generator are retained unchanged.

get_mode() → EutraTcwGsModeDefaultRange

# [SOURce<HW>]:BB:EUTRa:TCW:GS:MODE
value: enums.EutraTcwGsModeDefaultRange = driver.source.bb.eutra.tcw.gs.get_mode()

No help available

get_option() → UtraTcwgsoPtion

# [SOURce<HW>]:BB:EUTRa:TCW:GS:OPTion
value: enums.UtraTcwgsoPtion = driver.source.bb.eutra.tcw.gs.get_option()

No help available

get_release() → EutraTcwRelease

# [SOURce<HW>]:BB:EUTRa:TCW:GS:RELease
value: enums.EutraTcwRelease = driver.source.bb.eutra.tcw.gs.get_release()

Sets the 3GPP test specification used as a guideline for the test cases.

Returns:

release: REL8 | REL9 | REL10 | REL11

get_rx_antennas() → EutraTcwNumOfRxAnt

# [SOURce<HW>]:BB:EUTRa:TCW:GS:RXANtennas
value: enums.EutraTcwNumOfRxAnt = driver.source.bb.eutra.tcw.gs.get_rx_antennas()

No help available

get_sig_rout() → EutraTcwSignalRout

# [SOURce<HW>]:BB:EUTRa:TCW:GS:SIGRout
value: enums.EutraTcwSignalRout = driver.source.bb.eutra.tcw.gs.get_sig_rout()

Selects the signal routing for baseband A signal which usually represents the wanted signal.

Returns:

signal_routing: PORTA

get_spec() → UtraTcwsPec

# [SOURce<HW>]:BB:EUTRa:TCW:GS:SPEC
value: enums.UtraTcwsPec = driver.source.bb.eutra.tcw.gs.get_spec()

Selects the 3GPP test specification used as a guideline for the test cases.

Returns:

gs_spec: TS36141

get_stc() → UtraTcwgssUbtest

# [SOURce<HW>]:BB:EUTRa:TCW:GS:STC
value: enums.UtraTcwgssUbtest = driver.source.bb.eutra.tcw.gs.get_stc()

No help available

get_trigger_config() → EutraTcwtRigConf

# [SOURce<HW>]:BB:EUTRa:TCW:GS:TRIGgerconfig
value: enums.EutraTcwtRigConf = driver.source.bb.eutra.tcw.gs.get_trigger_config()

Selects the trigger configuration. The trigger is used to synchronize the signal generator to the other equipment.

Returns:

trigger_config: UNCHanged | AAUTo UNCHanged The current trigger settings of the signal generator are retained unchanged. AAUTo The trigger settings are customized for the selected test case. The trigger setting ‘Armed Auto’ with external trigger source is used; the trigger delay is set to zero. Thus, the base station frame timing is able to synchronize the signal generator by a periodic trigger.

get_tx_antennas() → TxAntenna

# [SOURce<HW>]:BB:EUTRa:TCW:GS:TXANtennas
value: enums.TxAntenna = driver.source.bb.eutra.tcw.gs.get_tx_antennas()

No help available

set_ant_subset(antenna_subset: EutraTcwaNtSubset) → None

# [SOURce<HW>]:BB:EUTRa:TCW:GS:ANTSubset
driver.source.bb.eutra.tcw.gs.set_ant_subset(antenna_subset = enums.EutraTcwaNtSubset.ALL)

No help available

set_bs_class(bs_class: UtraTcwbSclass) → None

# [SOURce<HW>]:BB:EUTRa:TCW:GS:BSCLass
driver.source.bb.eutra.tcw.gs.set_bs_class(bs_class = enums.UtraTcwbSclass.HOME)

Sets the base station class.

Parameters:

bs_class – WIDE | LOCal | HOME | MEDium

set_gen_signals(generated_signal: EutraTcwGeneratedSig) → None

# [SOURce<HW>]:BB:EUTRa:TCW:GS:GENSignals
driver.source.bb.eutra.tcw.gs.set_gen_signals(generated_signal = enums.EutraTcwGeneratedSig.IF)

No help available

set_inst_setup(instrument_setup: EutraTcwiNstSetup) → None

# [SOURce<HW>]:BB:EUTRa:TCW:GS:INSTsetup
driver.source.bb.eutra.tcw.gs.set_inst_setup(instrument_setup = enums.EutraTcwiNstSetup.U1PATH)

No help available

set_marker_config(marker_config: EutraTcwMarkConf) → None

# [SOURce<HW>]:BB:EUTRa:TCW:GS:MARKerconfig
driver.source.bb.eutra.tcw.gs.set_marker_config(marker_config = enums.EutraTcwMarkConf.FRAMe)

Selects the marker configuration. The marker can be used to synchronize the measuring equipment to the signal generator.

Parameters:

marker_config – UNCHanged | FRAMe FRAMe The marker settings are customized for the selected test case. ‘Radio Frame Start’ markers are output; the marker delays are set equal to zero. UNCHanged The current marker settings of the signal generator are retained unchanged.

set_mode(mode: EutraTcwGsModeDefaultRange) → None

# [SOURce<HW>]:BB:EUTRa:TCW:GS:MODE
driver.source.bb.eutra.tcw.gs.set_mode(mode = enums.EutraTcwGsModeDefaultRange.ADRate)

No help available

set_option(option: UtraTcwgsoPtion) → None

# [SOURce<HW>]:BB:EUTRa:TCW:GS:OPTion
driver.source.bb.eutra.tcw.gs.set_option(option = enums.UtraTcwgsoPtion.OPT1)

No help available

set_release(release: EutraTcwRelease) → None

# [SOURce<HW>]:BB:EUTRa:TCW:GS:RELease
driver.source.bb.eutra.tcw.gs.set_release(release = enums.EutraTcwRelease.REL10)

Sets the 3GPP test specification used as a guideline for the test cases.

Parameters:

release – REL8 | REL9 | REL10 | REL11

set_rx_antennas(num_of_rx_antennas: EutraTcwNumOfRxAnt) → None

# [SOURce<HW>]:BB:EUTRa:TCW:GS:RXANtennas
driver.source.bb.eutra.tcw.gs.set_rx_antennas(num_of_rx_antennas = enums.EutraTcwNumOfRxAnt.ANT1)

No help available

set_sig_rout(signal_routing: EutraTcwSignalRout) → None

# [SOURce<HW>]:BB:EUTRa:TCW:GS:SIGRout
driver.source.bb.eutra.tcw.gs.set_sig_rout(signal_routing = enums.EutraTcwSignalRout.PORTA)

Selects the signal routing for baseband A signal which usually represents the wanted signal.

Parameters:

signal_routing – PORTA

set_spec(gs_spec: UtraTcwsPec) → None

# [SOURce<HW>]:BB:EUTRa:TCW:GS:SPEC
driver.source.bb.eutra.tcw.gs.set_spec(gs_spec = enums.UtraTcwsPec.TS36141)

Selects the 3GPP test specification used as a guideline for the test cases.

Parameters:

gs_spec – TS36141

set_stc(sub_test_case: UtraTcwgssUbtest) → None

# [SOURce<HW>]:BB:EUTRa:TCW:GS:STC
driver.source.bb.eutra.tcw.gs.set_stc(sub_test_case = enums.UtraTcwgssUbtest.STC1)

No help available

set_trigger_config(trigger_config: EutraTcwtRigConf) → None

# [SOURce<HW>]:BB:EUTRa:TCW:GS:TRIGgerconfig
driver.source.bb.eutra.tcw.gs.set_trigger_config(trigger_config = enums.EutraTcwtRigConf.AAUTo)

Selects the trigger configuration. The trigger is used to synchronize the signal generator to the other equipment.

Parameters:

trigger_config – UNCHanged | AAUTo UNCHanged The current trigger settings of the signal generator are retained unchanged. AAUTo The trigger settings are customized for the selected test case. The trigger setting ‘Armed Auto’ with external trigger source is used; the trigger delay is set to zero. Thus, the base station frame timing is able to synchronize the signal generator by a periodic trigger.

set_tx_antennas(num_of_tx_antennas: TxAntenna) → None

# [SOURce<HW>]:BB:EUTRa:TCW:GS:TXANtennas
driver.source.bb.eutra.tcw.gs.set_tx_antennas(num_of_tx_antennas = enums.TxAntenna.ANT1)

No help available