Bstation<BaseStation>

RepCap Settings

# Range: Nr1 .. Nr4
rc = driver.source.bb.w3Gpp.bstation.repcap_baseStation_get()
driver.source.bb.w3Gpp.bstation.repcap_baseStation_set(repcap.BaseStation.Nr1)

SCPI Command :

[SOURce<HW>]:BB:W3GPp:BSTation:PRESet
class BstationCls[source]

Bstation commands group definition. 170 total commands, 13 Subgroups, 1 group commands Repeated Capability: BaseStation, default value after init: BaseStation.Nr1

preset() → None[source]
# SCPI: [SOURce<HW>]:BB:W3GPp:BSTation:PRESet
driver.source.bb.w3Gpp.bstation.preset()

The command produces a standardized default for all the base stations. The settings correspond to the *RST values specified for the commands. All base station settings are preset.

preset_with_opc(opc_timeout_ms: int = - 1) → None[source]
# SCPI: [SOURce<HW>]:BB:W3GPp:BSTation:PRESet
driver.source.bb.w3Gpp.bstation.preset_with_opc()

The command produces a standardized default for all the base stations. The settings correspond to the *RST values specified for the commands. All base station settings are preset.

Same as preset, but waits for the operation to complete before continuing further. Use the RsSmbv.utilities.opc_timeout_set() to set the timeout value.

param opc_timeout_ms

Maximum time to wait in milliseconds, valid only for this call.

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.source.bb.w3Gpp.bstation.clone()

Subgroups