Modulation<TwoStreams>

RepCap Settings

# Range: Nr1 .. Nr2
rc = driver.source.bb.w3Gpp.bstation.channel.hsdpa.hset.modulation.repcap_twoStreams_get()
driver.source.bb.w3Gpp.bstation.channel.hsdpa.hset.modulation.repcap_twoStreams_set(repcap.TwoStreams.Nr1)

SCPI Command :

[SOURce<HW>]:BB:W3GPp:BSTation<ST>:CHANnel<CH0>:HSDPa:HSET:MODulation<DI>

class ModulationCls

Modulation commands group definition. 1 total commands, 0 Subgroups, 1 group commands Repeated Capability: TwoStreams, default value after init: TwoStreams.Nr1

get(baseStation=BaseStation.Default, channelNull=ChannelNull.Default, twoStreams=TwoStreams.Default) → RsSmbv.enums.ModulationC

# SCPI: [SOURce<HW>]:BB:W3GPp:BSTation<ST>:CHANnel<CH0>:HSDPa:HSET:MODulation<DI>
value: enums.ModulationC = driver.source.bb.w3Gpp.bstation.channel.hsdpa.hset.modulation.get(baseStation = repcap.BaseStation.Default, channelNull = repcap.ChannelNull.Default, twoStreams = repcap.TwoStreams.Default)

Sets the modulation for stream 1 and stream 2 to QPSK, 16QAM or 64QAM. For HS-SCCH Type 2, the available modulation scheme is QPSK only.

param baseStation

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bstation’)

param channelNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Channel’)

param twoStreams

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Modulation’)

return

modulation: QPSK| QAM16| QAM64

set(modulation: RsSmbv.enums.ModulationC, baseStation=BaseStation.Default, channelNull=ChannelNull.Default, twoStreams=TwoStreams.Default) → None

# SCPI: [SOURce<HW>]:BB:W3GPp:BSTation<ST>:CHANnel<CH0>:HSDPa:HSET:MODulation<DI>
driver.source.bb.w3Gpp.bstation.channel.hsdpa.hset.modulation.set(modulation = enums.ModulationC.QAM16, baseStation = repcap.BaseStation.Default, channelNull = repcap.ChannelNull.Default, twoStreams = repcap.TwoStreams.Default)

Sets the modulation for stream 1 and stream 2 to QPSK, 16QAM or 64QAM. For HS-SCCH Type 2, the available modulation scheme is QPSK only.

param modulation

QPSK| QAM16| QAM64

param baseStation

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bstation’)

param channelNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Channel’)

param twoStreams

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Modulation’)

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.source.bb.w3Gpp.bstation.channel.hsdpa.hset.modulation.clone()