Tpc

SCPI Command :

[SOURce<HW>]:BB:W3GPp:BSTation<ST>:CHANnel<CH0>:DPCCh:POFFset:TPC

class TpcCls

Tpc commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(baseStation=BaseStation.Default, channelNull=ChannelNull.Default) → float

# SCPI: [SOURce<HW>]:BB:W3GPp:BSTation<ST>:CHANnel<CH0>:DPCCh:POFFset:TPC
value: float = driver.source.bb.w3Gpp.bstation.channel.dpcch.poffset.tpc.get(baseStation = repcap.BaseStation.Default, channelNull = repcap.ChannelNull.Default)

The command sets an offset to the set channel power for the TPC field. This setting is only valid for the DPCHs.

param baseStation

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bstation’)

param channelNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Channel’)

return

tpc: float Range: -10 to 10

set(tpc: float, baseStation=BaseStation.Default, channelNull=ChannelNull.Default) → None

# SCPI: [SOURce<HW>]:BB:W3GPp:BSTation<ST>:CHANnel<CH0>:DPCCh:POFFset:TPC
driver.source.bb.w3Gpp.bstation.channel.dpcch.poffset.tpc.set(tpc = 1.0, baseStation = repcap.BaseStation.Default, channelNull = repcap.ChannelNull.Default)

The command sets an offset to the set channel power for the TPC field. This setting is only valid for the DPCHs.

param tpc

float Range: -10 to 10

param baseStation

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bstation’)

param channelNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Channel’)