Crate<TwoStreams>

RepCap Settings

# Range: Nr1 .. Nr2
rc = driver.source.bb.w3Gpp.bstation.channel.hsdpa.hset.crate.repcap_twoStreams_get()
driver.source.bb.w3Gpp.bstation.channel.hsdpa.hset.crate.repcap_twoStreams_set(repcap.TwoStreams.Nr1)

SCPI Command :

[SOURce<HW>]:BB:W3GPp:BSTation<ST>:CHANnel<CH0>:HSDPa:HSET:CRATe<DI>

class CrateCls

Crate commands group definition. 1 total commands, 0 Subgroups, 1 group commands Repeated Capability: TwoStreams, default value after init: TwoStreams.Nr1

get(baseStation=BaseStation.Default, channelNull=ChannelNull.Default, twoStreams=TwoStreams.Default) → float

# SCPI: [SOURce<HW>]:BB:W3GPp:BSTation<ST>:CHANnel<CH0>:HSDPa:HSET:CRATe<DI>
value: float = driver.source.bb.w3Gpp.bstation.channel.hsdpa.hset.crate.get(baseStation = repcap.BaseStation.Default, channelNull = repcap.ChannelNull.Default, twoStreams = repcap.TwoStreams.Default)

Queries the resulting coding rate per stream. The coding rate is calculated as a relation between the ‘Information Bit Payload’ and ‘Binary Channel Bits per TTI’.

param baseStation

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bstation’)

param channelNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Channel’)

param twoStreams

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Crate’)

return

crate: float

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.source.bb.w3Gpp.bstation.channel.hsdpa.hset.crate.clone()