Pstep

SCPI Command :

[SOURce<HW>]:BB:W3GPp:BSTation<ST>:CHANnel<CH0>:FDPCh:DPCCh:TPC:PSTep

class PstepCls

Pstep commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(baseStation=BaseStation.Default, channelNull=ChannelNull.Default) → float

# SCPI: [SOURce<HW>]:BB:W3GPp:BSTation<ST>:CHANnel<CH0>:FDPCh:DPCCh:TPC:PSTep
value: float = driver.source.bb.w3Gpp.bstation.channel.fdpch.dpcch.tpc.pstep.get(baseStation = repcap.BaseStation.Default, channelNull = repcap.ChannelNull.Default)

The command defines the step width for the change of channel powers in the case of ‘mis-’ use of the TPC field.

param baseStation

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bstation’)

param channelNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Channel’)

return

pstep: float Range: -10.0 dB to 10.0 dB

set(pstep: float, baseStation=BaseStation.Default, channelNull=ChannelNull.Default) → None

# SCPI: [SOURce<HW>]:BB:W3GPp:BSTation<ST>:CHANnel<CH0>:FDPCh:DPCCh:TPC:PSTep
driver.source.bb.w3Gpp.bstation.channel.fdpch.dpcch.tpc.pstep.set(pstep = 1.0, baseStation = repcap.BaseStation.Default, channelNull = repcap.ChannelNull.Default)

The command defines the step width for the change of channel powers in the case of ‘mis-’ use of the TPC field.

param pstep

float Range: -10.0 dB to 10.0 dB

param baseStation

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bstation’)

param channelNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Channel’)