S64Qam

SCPI Command :

[SOURce<HW>]:BB:W3GPp:BSTation<ST>:CHANnel<CH0>:HSDPa:HSET:S64Qam

class S64QamCls

S64Qam commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(baseStation=BaseStation.Default, channelNull=ChannelNull.Default) → bool

# SCPI: [SOURce<HW>]:BB:W3GPp:BSTation<ST>:CHANnel<CH0>:HSDPa:HSET:S64Qam
value: bool = driver.source.bb.w3Gpp.bstation.channel.hsdpa.hset.s64Qam.get(baseStation = repcap.BaseStation.Default, channelNull = repcap.ChannelNull.Default)

Enables/disables UE support of 64QAM. This command is enabled only for HS-SCCH Type 1 (normal operation) and 16QAM modulation. In case this parameter is disabled, i.e. the UE does not support 64QAM, the xccs,7 bit is used for channelization information.

param baseStation

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bstation’)

param channelNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Channel’)

return

s_64_qam: ON| OFF

set(s_64_qam: bool, baseStation=BaseStation.Default, channelNull=ChannelNull.Default) → None

# SCPI: [SOURce<HW>]:BB:W3GPp:BSTation<ST>:CHANnel<CH0>:HSDPa:HSET:S64Qam
driver.source.bb.w3Gpp.bstation.channel.hsdpa.hset.s64Qam.set(s_64_qam = False, baseStation = repcap.BaseStation.Default, channelNull = repcap.ChannelNull.Default)

Enables/disables UE support of 64QAM. This command is enabled only for HS-SCCH Type 1 (normal operation) and 16QAM modulation. In case this parameter is disabled, i.e. the UE does not support 64QAM, the xccs,7 bit is used for channelization information.

param s_64_qam

ON| OFF

param baseStation

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bstation’)

param channelNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Channel’)