Dtx

SCPI Command :

[SOURce<HW>]:BB:W3GPp:BSTation:ENHanced:CHANnel<CH0>:DPCH:TCHannel<DI0>:DTX

class DtxCls

Dtx commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(channelNull=ChannelNull.Default, transportChannelNull=TransportChannelNull.Default) → int

# SCPI: [SOURce<HW>]:BB:W3GPp:BSTation:ENHanced:CHANnel<CH0>:DPCH:TCHannel<DI0>:DTX
value: int = driver.source.bb.w3Gpp.bstation.enhanced.channel.dpch.tchannel.dtx.get(channelNull = repcap.ChannelNull.Default, transportChannelNull = repcap.TransportChannelNull.Default)

The command sets the number of DTX (Discontinuous Transmission) bits. These bits are entered in the data stream between rate matching and interleaver 1 and used for the BTFD reference measurement channels rate 2 and rate 3.

param channelNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Channel’)

param transportChannelNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Tchannel’)

return

dtx: integer Range: 0 to 1024

set(dtx: int, channelNull=ChannelNull.Default, transportChannelNull=TransportChannelNull.Default) → None

# SCPI: [SOURce<HW>]:BB:W3GPp:BSTation:ENHanced:CHANnel<CH0>:DPCH:TCHannel<DI0>:DTX
driver.source.bb.w3Gpp.bstation.enhanced.channel.dpch.tchannel.dtx.set(dtx = 1, channelNull = repcap.ChannelNull.Default, transportChannelNull = repcap.TransportChannelNull.Default)

The command sets the number of DTX (Discontinuous Transmission) bits. These bits are entered in the data stream between rate matching and interleaver 1 and used for the BTFD reference measurement channels rate 2 and rate 3.

param dtx

integer Range: 0 to 1024

param channelNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Channel’)

param transportChannelNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Tchannel’)