ScCode

SCPI Command :

[SOURce<HW>]:BB:W3GPp:BSTation<ST>:CHANnel<CH0>:HSDPa:HSET:SCCode

class ScCodeCls

ScCode commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(baseStation=BaseStation.Default, channelNull=ChannelNull.Default) → int

# SCPI: [SOURce<HW>]:BB:W3GPp:BSTation<ST>:CHANnel<CH0>:HSDPa:HSET:SCCode
value: int = driver.source.bb.w3Gpp.bstation.channel.hsdpa.hset.scCode.get(baseStation = repcap.BaseStation.Default, channelNull = repcap.ChannelNull.Default)

Sets the channelization code of the first HS-PDSCH channel in the H-Set. The channelization codes of the rest of the HS-PDSCHs in this H-Set are set automatically. Note: To let the instrument generate a signal equal to the one generated by an instrument equipped with older firmware, set the same Channelization Codes as the codes used for your physical channels.

param baseStation

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bstation’)

param channelNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Channel’)

return

sc_code: integer Range: 1 to 15

set(sc_code: int, baseStation=BaseStation.Default, channelNull=ChannelNull.Default) → None

# SCPI: [SOURce<HW>]:BB:W3GPp:BSTation<ST>:CHANnel<CH0>:HSDPa:HSET:SCCode
driver.source.bb.w3Gpp.bstation.channel.hsdpa.hset.scCode.set(sc_code = 1, baseStation = repcap.BaseStation.Default, channelNull = repcap.ChannelNull.Default)

Sets the channelization code of the first HS-PDSCH channel in the H-Set. The channelization codes of the rest of the HS-PDSCHs in this H-Set are set automatically. Note: To let the instrument generate a signal equal to the one generated by an instrument equipped with older firmware, set the same Channelization Codes as the codes used for your physical channels.

param sc_code

integer Range: 1 to 15

param baseStation

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bstation’)

param channelNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Channel’)