Misuse

SCPI Command :

[SOURce<HW>]:BB:W3GPp:BSTation<ST>:CHANnel<CH0>:DPCCh:TPC:MISuse

class MisuseCls

Misuse commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(baseStation=BaseStation.Default, channelNull=ChannelNull.Default) → bool

# SCPI: [SOURce<HW>]:BB:W3GPp:BSTation<ST>:CHANnel<CH0>:DPCCh:TPC:MISuse
value: bool = driver.source.bb.w3Gpp.bstation.channel.dpcch.tpc.misuse.get(baseStation = repcap.BaseStation.Default, channelNull = repcap.ChannelNull.Default)

The command activates ‘mis-’ use of the TPC field (Transmit Power Control) of the selected channel for controlling the channel powers of these channels of the specified base station. The bit pattern (see commands W3GPp:BSTation<n>:CHANnel<n>:DPCCh:TPC…) of the TPC field of each channel is used to control the channel power. A ‘1’ leads to an increase of channel powers, a ‘0’ to a reduction of channel powers. Channel power is limited to the range 0 dB to -60 dB. The step width of the change is defined with the command [:SOURce<hw>]:BB:W3GPp:BSTation<st>:CHANnel<ch0>:DPCCh:TPC:PSTep.

param baseStation

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bstation’)

param channelNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Channel’)

return

misuse: ON| OFF

set(misuse: bool, baseStation=BaseStation.Default, channelNull=ChannelNull.Default) → None

# SCPI: [SOURce<HW>]:BB:W3GPp:BSTation<ST>:CHANnel<CH0>:DPCCh:TPC:MISuse
driver.source.bb.w3Gpp.bstation.channel.dpcch.tpc.misuse.set(misuse = False, baseStation = repcap.BaseStation.Default, channelNull = repcap.ChannelNull.Default)

The command activates ‘mis-’ use of the TPC field (Transmit Power Control) of the selected channel for controlling the channel powers of these channels of the specified base station. The bit pattern (see commands W3GPp:BSTation<n>:CHANnel<n>:DPCCh:TPC…) of the TPC field of each channel is used to control the channel power. A ‘1’ leads to an increase of channel powers, a ‘0’ to a reduction of channel powers. Channel power is limited to the range 0 dB to -60 dB. The step width of the change is defined with the command [:SOURce<hw>]:BB:W3GPp:BSTation<st>:CHANnel<ch0>:DPCCh:TPC:PSTep.

param misuse

ON| OFF

param baseStation

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bstation’)

param channelNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Channel’)