State

SCPI Command :

[SOURce<HW>]:BB:W3GPp:BSTation:ENHanced:CHANnel<CH0>:DPCH:DERRor:BIT:STATe

class StateCls

State commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(channelNull=ChannelNull.Default) → bool

# SCPI: [SOURce<HW>]:BB:W3GPp:BSTation:ENHanced:CHANnel<CH0>:DPCH:DERRor:BIT:STATe
value: bool = driver.source.bb.w3Gpp.bstation.enhanced.channel.dpch.derror.bit.state.get(channelNull = repcap.ChannelNull.Default)

The command activates bit error generation or deactivates it. Bit errors are inserted into the data fields of the enhanced channels. When channel coding is active, it is possible to select the layer in which to insert the errors (the physical or the transport layer, [:SOURce<hw>]:BB:W3GPp:BSTation:ENHanced:CHANnel<ch0>:DPCH:DERRor:BIT:LAYer) . When the data source is read out, individual bits are deliberately inverted at random points in the data bit stream at the specified error rate in order to simulate an invalid signal.

param channelNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Channel’)

return

state: ON| OFF

set(state: bool, channelNull=ChannelNull.Default) → None

# SCPI: [SOURce<HW>]:BB:W3GPp:BSTation:ENHanced:CHANnel<CH0>:DPCH:DERRor:BIT:STATe
driver.source.bb.w3Gpp.bstation.enhanced.channel.dpch.derror.bit.state.set(state = False, channelNull = repcap.ChannelNull.Default)

The command activates bit error generation or deactivates it. Bit errors are inserted into the data fields of the enhanced channels. When channel coding is active, it is possible to select the layer in which to insert the errors (the physical or the transport layer, [:SOURce<hw>]:BB:W3GPp:BSTation:ENHanced:CHANnel<ch0>:DPCH:DERRor:BIT:LAYer) . When the data source is read out, individual bits are deliberately inverted at random points in the data bit stream at the specified error rate in order to simulate an invalid signal.

param state

ON| OFF

param channelNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Channel’)