Mode

SCPI Command :

[SOURce<HW>]:BB:W3GPp:BSTation<ST>:CHANnel<CH0>:HSDPa:HSET:HARQ:MODE

class ModeCls

Mode commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(baseStation=BaseStation.Default, channelNull=ChannelNull.Default) → RsSmbv.enums.EnhHsHarqMode

# SCPI: [SOURce<HW>]:BB:W3GPp:BSTation<ST>:CHANnel<CH0>:HSDPa:HSET:HARQ:MODE
value: enums.EnhHsHarqMode = driver.source.bb.w3Gpp.bstation.channel.hsdpa.hset.harq.mode.get(baseStation = repcap.BaseStation.Default, channelNull = repcap.ChannelNull.Default)

Sets the HARQ Simulation Mode.

param baseStation

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bstation’)

param channelNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Channel’)

return

mode: CACK| CNACk CACK New data is used for each new TTI. CNACk Enables NACK simulation, i.e. depending on the sequence selected for the parameter Redundancy Version Parameter Sequence packets are retransmitted.

set(mode: RsSmbv.enums.EnhHsHarqMode, baseStation=BaseStation.Default, channelNull=ChannelNull.Default) → None

# SCPI: [SOURce<HW>]:BB:W3GPp:BSTation<ST>:CHANnel<CH0>:HSDPa:HSET:HARQ:MODE
driver.source.bb.w3Gpp.bstation.channel.hsdpa.hset.harq.mode.set(mode = enums.EnhHsHarqMode.CACK, baseStation = repcap.BaseStation.Default, channelNull = repcap.ChannelNull.Default)

Sets the HARQ Simulation Mode.

param mode

CACK| CNACk CACK New data is used for each new TTI. CNACk Enables NACK simulation, i.e. depending on the sequence selected for the parameter Redundancy Version Parameter Sequence packets are retransmitted.

param baseStation

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bstation’)

param channelNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Channel’)