State

SCPI Command :

[SOURce<HW>]:BB:W3GPp:BSTation<ST>:CHANnel<CH0>:DPCCh:TFCI:STATe

class StateCls

State commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(baseStation=BaseStation.Default, channelNull=ChannelNull.Default) → bool

# SCPI: [SOURce<HW>]:BB:W3GPp:BSTation<ST>:CHANnel<CH0>:DPCCh:TFCI:STATe
value: bool = driver.source.bb.w3Gpp.bstation.channel.dpcch.tfci.state.get(baseStation = repcap.BaseStation.Default, channelNull = repcap.ChannelNull.Default)

The command activates the TFCI field (Transport Format Combination Identifier) for the selected channel of the specified base station. The slot format determines the symbol rate (and thus the range of values for the channelization code) , the TFCI state and the pilot length. If the value of any one of the four parameters is changed, all the other parameters are adapted as necessary. In the case of enhanced channels with active channel coding, the selected channel coding also affects the slot format and thus the remaining parameters. If these parameters are changed, the channel coding type is set to user.

param baseStation

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bstation’)

param channelNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Channel’)

return

state: ON| OFF

set(state: bool, baseStation=BaseStation.Default, channelNull=ChannelNull.Default) → None

# SCPI: [SOURce<HW>]:BB:W3GPp:BSTation<ST>:CHANnel<CH0>:DPCCh:TFCI:STATe
driver.source.bb.w3Gpp.bstation.channel.dpcch.tfci.state.set(state = False, baseStation = repcap.BaseStation.Default, channelNull = repcap.ChannelNull.Default)

The command activates the TFCI field (Transport Format Combination Identifier) for the selected channel of the specified base station. The slot format determines the symbol rate (and thus the range of values for the channelization code) , the TFCI state and the pilot length. If the value of any one of the four parameters is changed, all the other parameters are adapted as necessary. In the case of enhanced channels with active channel coding, the selected channel coding also affects the slot format and thus the remaining parameters. If these parameters are changed, the channel coding type is set to user.

param state

ON| OFF

param baseStation

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bstation’)

param channelNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Channel’)