State

SCPI Command :

[SOURce<HW>]:BB:W3GPp:BSTation<ST>:CHANnel<CH0>:HSDPa:BMODe:[STATe]

class StateCls[source]

State commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(baseStation=BaseStation.Default, channelNull=ChannelNull.Default) → bool[source]

# SCPI: [SOURce<HW>]:BB:W3GPp:BSTation<ST>:CHANnel<CH0>:HSDPa:BMODe:[STATe]
value: bool = driver.source.bb.w3Gpp.bstation.channel.hsdpa.bmode.state.get(baseStation = repcap.BaseStation.Default, channelNull = repcap.ChannelNull.Default)

The command activates/deactivates burst mode. The signal is bursted when on, otherwise dummy data are sent during transmission brakes.

param baseStation

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bstation’)

param channelNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Channel’)

return

state: ON| OFF

set(state: bool, baseStation=BaseStation.Default, channelNull=ChannelNull.Default) → None[source]

# SCPI: [SOURce<HW>]:BB:W3GPp:BSTation<ST>:CHANnel<CH0>:HSDPa:BMODe:[STATe]
driver.source.bb.w3Gpp.bstation.channel.hsdpa.bmode.state.set(state = False, baseStation = repcap.BaseStation.Default, channelNull = repcap.ChannelNull.Default)

The command activates/deactivates burst mode. The signal is bursted when on, otherwise dummy data are sent during transmission brakes.

param state

ON| OFF

param baseStation

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bstation’)

param channelNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Channel’)