Direction

SCPI Command :

[SOURce<HW>]:BB:W3GPp:BSTation:ENHanced:CHANnel<CH0>:DPCH:DPControl:DIRection

class DirectionCls

Direction commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(channelNull=ChannelNull.Default) → RsSmbv.enums.UpDownDirection

# SCPI: [SOURce<HW>]:BB:W3GPp:BSTation:ENHanced:CHANnel<CH0>:DPCH:DPControl:DIRection
value: enums.UpDownDirection = driver.source.bb.w3Gpp.bstation.enhanced.channel.dpch.dpControl.direction.get(channelNull = repcap.ChannelNull.Default)

The command selects the Dynamic Power Control direction. The selected mode determines if the channel power is increased (UP) or decreased (DOWN) by a control signal with high level.

param channelNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Channel’)

return

direction: UP| DOWN

set(direction: RsSmbv.enums.UpDownDirection, channelNull=ChannelNull.Default) → None

# SCPI: [SOURce<HW>]:BB:W3GPp:BSTation:ENHanced:CHANnel<CH0>:DPCH:DPControl:DIRection
driver.source.bb.w3Gpp.bstation.enhanced.channel.dpch.dpControl.direction.set(direction = enums.UpDownDirection.DOWN, channelNull = repcap.ChannelNull.Default)

The command selects the Dynamic Power Control direction. The selected mode determines if the channel power is increased (UP) or decreased (DOWN) by a control signal with high level.

param direction

UP| DOWN

param channelNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Channel’)