SymbolRate

SCPI Command :

[SOURce<HW>]:BB:W3GPp:BSTation<ST>:CHANnel<CH0>:SRATe

class SymbolRateCls

SymbolRate commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(baseStation=BaseStation.Default, channelNull=ChannelNull.Default) → RsSmbv.enums.SymbRate

# SCPI: [SOURce<HW>]:BB:W3GPp:BSTation<ST>:CHANnel<CH0>:SRATe
value: enums.SymbRate = driver.source.bb.w3Gpp.bstation.channel.symbolRate.get(baseStation = repcap.BaseStation.Default, channelNull = repcap.ChannelNull.Default)

The command sets the symbol rate of the selected channel. The value range depends on the selected channel and the selected slot format. The slot format determines the symbol rate (and thus the range of values for the channelization code) , the TFCI state and the pilot length. If the value of any one of the four parameters is changed, all the other parameters are adapted as necessary. In the case of enhanced channels with active channel coding, the selected channel coding also affects the slot format and thus the remaining parameters. If these parameters are changed, the channel coding type is set to user.

param baseStation

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bstation’)

param channelNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Channel’)

return

srate: D7K5| D15K| D30K| D60K| D120k| D240k| D480k| D960k

set(srate: RsSmbv.enums.SymbRate, baseStation=BaseStation.Default, channelNull=ChannelNull.Default) → None

# SCPI: [SOURce<HW>]:BB:W3GPp:BSTation<ST>:CHANnel<CH0>:SRATe
driver.source.bb.w3Gpp.bstation.channel.symbolRate.set(srate = enums.SymbRate.D120k, baseStation = repcap.BaseStation.Default, channelNull = repcap.ChannelNull.Default)

The command sets the symbol rate of the selected channel. The value range depends on the selected channel and the selected slot format. The slot format determines the symbol rate (and thus the range of values for the channelization code) , the TFCI state and the pilot length. If the value of any one of the four parameters is changed, all the other parameters are adapted as necessary. In the case of enhanced channels with active channel coding, the selected channel coding also affects the slot format and thus the remaining parameters. If these parameters are changed, the channel coding type is set to user.

param srate

D7K5| D15K| D30K| D60K| D120k| D240k| D480k| D960k

param baseStation

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bstation’)

param channelNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Channel’)