Cbw

SCPI Command :

[SOURce<HW>]:BB:NR5G:NODE:CELL<CC(CH0)>:LTE:PATT<ST0>:CBW
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(cellNull=CellNull.Default, patternNull=PatternNull.Default) → LteCrsCarrierBwAll[source]
# [SOURce<HW>]:BB:NR5G:NODE:CELL<CC(CH0)>:LTE:PATT<ST0>:CBW
value: enums.LteCrsCarrierBwAll = driver.source.bb.nr5G.node.cell.lte.patt.cbw.get(cellNull = repcap.CellNull.Default, patternNull = repcap.PatternNull.Default)

Selects the channel bandwidth of an LTE carrier. Prerequisites for this command

  • Turn on LTE-CRS coexistence (method RsSmbv.source.bb.nr5G.node.cell.lte.state.set() ) .

Parameters:

  • cellNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cell’)

  • patternNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Patt’)

set(lte_carrier_bw: LteCrsCarrierBwAll, cellNull=CellNull.Default, patternNull=PatternNull.Default) → None[source]
# [SOURce<HW>]:BB:NR5G:NODE:CELL<CC(CH0)>:LTE:PATT<ST0>:CBW
driver.source.bb.nr5G.node.cell.lte.patt.cbw.set(lte_carrier_bw = enums.LteCrsCarrierBwAll.N100, cellNull = repcap.CellNull.Default, patternNull = repcap.PatternNull.Default)

Selects the channel bandwidth of an LTE carrier. Prerequisites for this command

  • Turn on LTE-CRS coexistence (method RsSmbv.source.bb.nr5G.node.cell.lte.state.set() ) .

Parameters:

  • lte_carrier_bw – N6 | N15 | N25 | N50 | N75 | N100

  • cellNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cell’)

  • patternNull – optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Patt’)