Trigger

SCPI Commands :

[SOURce<HW>]:BB:NR5G:TRIGger:RMODe
[SOURce<HW>]:BB:NR5G:TRIGger:SLENgth
[SOURce<HW>]:BB:NR5G:TRIGger:SLUNit
[SOURce<HW>]:BB:NR5G:TRIGger:SOURce
[SOURce<HW>]:BB:NR5G:[TRIGger]:SEQuence
Commands in total: 44
Subgroups: 7
Direct child commands: 5
get_rmode() → TrigRunMode[source]
# [SOURce<HW>]:BB:NR5G:TRIGger:RMODe
value: enums.TrigRunMode = driver.source.bb.nr5G.trigger.get_rmode()

Queries the signal generation status.

Returns:

trig_run_mode: STOP | RUN

get_sequence() → DmTrigMode[source]
# [SOURce<HW>]:BB:NR5G:[TRIGger]:SEQuence
value: enums.DmTrigMode = driver.source.bb.nr5G.trigger.get_sequence()

Sets the trigger mode.

Returns:

trig_mode: AUTO | RETRigger | AAUTo | ARETrigger | SINGle

get_sl_unit() → UnitSlB[source]
# [SOURce<HW>]:BB:NR5G:TRIGger:SLUNit
value: enums.UnitSlB = driver.source.bb.nr5G.trigger.get_sl_unit()

Defines the unit for the entry of the signal sequence length.

Returns:

trig_seq_len_unit: SEQuence | SAMPle

get_slength() → int[source]
# [SOURce<HW>]:BB:NR5G:TRIGger:SLENgth
value: int = driver.source.bb.nr5G.trigger.get_slength()

Defines the length of the signal sequence that is output in the SINGle trigger mode.

Returns:

trig_seq_len: integer Range: 1 to dynamic

get_source() → TriggerSourceC[source]
# [SOURce<HW>]:BB:NR5G:TRIGger:SOURce
value: enums.TriggerSourceC = driver.source.bb.nr5G.trigger.get_source()

Selects the trigger signal source and determines the way the triggering is executed. Provided are:

  • Internal triggering by a command (INTernal)

  • External trigger signal via one of the User x connectors EGT1: External global trigger

  • In primary-secondary instrument mode, the external baseband synchronization signal (BBSY)

  • EXTernal: Setting only Provided only for backward compatibility with other Rohde & Schwarz signal generators. The R&S SMBV100B accepts this value and maps it automatically as follows: EXTernal = EGT1

Returns:

trig_source: INTernal | EGT1 | EXTernal | BBSY

set_sequence(trig_mode: DmTrigMode) → None[source]
# [SOURce<HW>]:BB:NR5G:[TRIGger]:SEQuence
driver.source.bb.nr5G.trigger.set_sequence(trig_mode = enums.DmTrigMode.AAUTo)

Sets the trigger mode.

Parameters:

trig_mode – AUTO | RETRigger | AAUTo | ARETrigger | SINGle

set_sl_unit(trig_seq_len_unit: UnitSlB) → None[source]
# [SOURce<HW>]:BB:NR5G:TRIGger:SLUNit
driver.source.bb.nr5G.trigger.set_sl_unit(trig_seq_len_unit = enums.UnitSlB.SAMPle)

Defines the unit for the entry of the signal sequence length.

Parameters:

trig_seq_len_unit – SEQuence | SAMPle

set_slength(trig_seq_len: int) → None[source]
# [SOURce<HW>]:BB:NR5G:TRIGger:SLENgth
driver.source.bb.nr5G.trigger.set_slength(trig_seq_len = 1)

Defines the length of the signal sequence that is output in the SINGle trigger mode.

Parameters:

trig_seq_len – integer Range: 1 to dynamic

set_source(trig_source: TriggerSourceC) → None[source]
# [SOURce<HW>]:BB:NR5G:TRIGger:SOURce
driver.source.bb.nr5G.trigger.set_source(trig_source = enums.TriggerSourceC.BBSY)

Selects the trigger signal source and determines the way the triggering is executed. Provided are:

  • Internal triggering by a command (INTernal)

  • External trigger signal via one of the User x connectors EGT1: External global trigger

  • In primary-secondary instrument mode, the external baseband synchronization signal (BBSY)

  • EXTernal: Setting only Provided only for backward compatibility with other Rohde & Schwarz signal generators. The R&S SMBV100B accepts this value and maps it automatically as follows: EXTernal = EGT1

Parameters:

trig_source – INTernal | EGT1 | EXTernal | BBSY

Cloning the Group

# Create a copy of the original group, that exists independently
trigger_copy = driver.source.bb.nr5G.trigger.clone()

Subgroups