Dfreq

SCPI Command :

[SOURce<HW>]:BB:NR5G:NODE:CELL<CC(CH0)>:DFReq

class DfreqCls

Dfreq commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(cellNull=CellNull.Default) → float

# SCPI: [SOURce<HW>]:BB:NR5G:NODE:CELL<CC(CH0)>:DFReq
value: float = driver.source.bb.nr5G.node.cell.dfreq.get(cellNull = repcap.CellNull.Default)

Shifts the signal relative to the center output frequency. Use different frequency offsets to separate the channels of the configured and enabled cells.

param cellNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cell’)

return

delta_fto_dc: float Range: -40E6 to 40E6

set(delta_fto_dc: float, cellNull=CellNull.Default) → None

# SCPI: [SOURce<HW>]:BB:NR5G:NODE:CELL<CC(CH0)>:DFReq
driver.source.bb.nr5G.node.cell.dfreq.set(delta_fto_dc = 1.0, cellNull = repcap.CellNull.Default)

Shifts the signal relative to the center output frequency. Use different frequency offsets to separate the channels of the configured and enabled cells.

param delta_fto_dc

float Range: -40E6 to 40E6

param cellNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cell’)