Invert

SCPI Command :

[SOURce<HW>]:BB:NR5G:TRIGger:OUTPut<CH>:INVert

class InvertCls

Invert commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(output=Output.Default) → bool

# SCPI: [SOURce<HW>]:BB:NR5G:TRIGger:OUTPut<CH>:INVert
value: bool = driver.source.bb.nr5G.trigger.output.invert.get(output = repcap.Output.Default)

Turns inversion of the marker signal on and off.

param output

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Output’)

return

invert: 1| ON| 0| OFF 1 | ON Marker is on a falling edge. 0 | OFF Marker is on a rising edge.

set(invert: bool, output=Output.Default) → None

# SCPI: [SOURce<HW>]:BB:NR5G:TRIGger:OUTPut<CH>:INVert
driver.source.bb.nr5G.trigger.output.invert.set(invert = False, output = repcap.Output.Default)

Turns inversion of the marker signal on and off.

param invert

1| ON| 0| OFF 1 | ON Marker is on a falling edge. 0 | OFF Marker is on a rising edge.

param output

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Output’)