Efficiency

SCPI Commands :

[SOURce<HW>]:[BB]:DME:EFFiciency:REPLies
[SOURce<HW>]:[BB]:DME:EFFiciency

Commands in total: 2

Subgroups: 0

Direct child commands: 2

get_replies() → AvionicDmeReplCount

# [SOURce<HW>]:[BB]:DME:EFFiciency:REPLies
value: enums.AvionicDmeReplCount = driver.source.bb.dme.efficiency.get_replies()

Sets the number of reply pulses. Use this number to specify absolute values of false or correct pulses during reply efficiency measurements.

Returns:

no_of_replies: 10 | 50 | 100 10, 50 or 100 reply pulses

get_value() → int

# [SOURce<HW>]:[BB]:DME:EFFiciency
value: int = driver.source.bb.dme.efficiency.get_value()

Sets the relation between reply pulse pairs and received trigger signals, e.g. with a set efficiency of 50% only every second trigger event leads to the generation of a reply pulse pair.

Returns:

efficiency: integer Range: 0 to 100

set_replies(no_of_replies: AvionicDmeReplCount) → None

# [SOURce<HW>]:[BB]:DME:EFFiciency:REPLies
driver.source.bb.dme.efficiency.set_replies(no_of_replies = enums.AvionicDmeReplCount._10)

Sets the number of reply pulses. Use this number to specify absolute values of false or correct pulses during reply efficiency measurements.

Parameters:

no_of_replies – 10 | 50 | 100 10, 50 or 100 reply pulses

set_value(efficiency: int) → None

# [SOURce<HW>]:[BB]:DME:EFFiciency
driver.source.bb.dme.efficiency.set_value(efficiency = 1)

Sets the relation between reply pulse pairs and received trigger signals, e.g. with a set efficiency of 50% only every second trigger event leads to the generation of a reply pulse pair.

Parameters:

efficiency – integer Range: 0 to 100