Rate

SCPI Command :

[SOURce<HW>]:BB:C2K:BSTation<ST>:CGRoup<DI0>:COFFset<CH>:DATA:RATE

class RateCls

Rate commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(baseStation=BaseStation.Default, groupNull=GroupNull.Default, offset=Offset.Default) → RsSmbv.enums.Cdma2KdataRate

# SCPI: [SOURce<HW>]:BB:C2K:BSTation<ST>:CGRoup<DI0>:COFFset<CH>:DATA:RATE
value: enums.Cdma2KdataRate = driver.source.bb.c2K.bstation.cgroup.coffset.data.rate.get(baseStation = repcap.BaseStation.Default, groupNull = repcap.GroupNull.Default, offset = repcap.Offset.Default)

The command sets the data rate for the specified channel. The value range depends on the channel type, the selected radio configuration and the frame length. Parameter NUSed is returned for channel 0-1 to 0-4. For the traffic channels, this value is specific for the selected radio configuration. The value range depends on the frame length. If the frame length is changed so that the set data rate becomes invalid, the next permissible value is automatically set. The data rate affects the Walsh code (spreading factor) that are possible within a channel. If a data rate is changed so that the selected Walsh code becomes invalid, the next permissible value is automatically set.

param baseStation

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bstation’)

param groupNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cgroup’)

param offset

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Coffset’)

return

rate: DR1K2| DR1K3| DR1K5| DR1K8| DR2K4| DR2K7| DR3K6| DR4K8| DR7K2| DR9K6| DR14K4| DR19K2| DR28K8| DR38K4| DR57K6| DR76K8| DR115K2| DR153K6| DR230K4| DR307K2| NUSed

set(rate: RsSmbv.enums.Cdma2KdataRate, baseStation=BaseStation.Default, groupNull=GroupNull.Default, offset=Offset.Default) → None

# SCPI: [SOURce<HW>]:BB:C2K:BSTation<ST>:CGRoup<DI0>:COFFset<CH>:DATA:RATE
driver.source.bb.c2K.bstation.cgroup.coffset.data.rate.set(rate = enums.Cdma2KdataRate.DR1036K8, baseStation = repcap.BaseStation.Default, groupNull = repcap.GroupNull.Default, offset = repcap.Offset.Default)

The command sets the data rate for the specified channel. The value range depends on the channel type, the selected radio configuration and the frame length. Parameter NUSed is returned for channel 0-1 to 0-4. For the traffic channels, this value is specific for the selected radio configuration. The value range depends on the frame length. If the frame length is changed so that the set data rate becomes invalid, the next permissible value is automatically set. The data rate affects the Walsh code (spreading factor) that are possible within a channel. If a data rate is changed so that the selected Walsh code becomes invalid, the next permissible value is automatically set.

param rate

DR1K2| DR1K3| DR1K5| DR1K8| DR2K4| DR2K7| DR3K6| DR4K8| DR7K2| DR9K6| DR14K4| DR19K2| DR28K8| DR38K4| DR57K6| DR76K8| DR115K2| DR153K6| DR230K4| DR307K2| NUSed

param baseStation

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bstation’)

param groupNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cgroup’)

param offset

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Coffset’)