Tdiversity

SCPI Command :

[SOURce<HW>]:BB:C2K:BSTation<ST>:TDIVersity

class TdiversityCls

Tdiversity commands group definition. 2 total commands, 1 Subgroups, 1 group commands

get(baseStation=BaseStation.Default) → RsSmbv.enums.Cdma2KtxDiv

# SCPI: [SOURce<HW>]:BB:C2K:BSTation<ST>:TDIVersity
value: enums.Cdma2KtxDiv = driver.source.bb.c2K.bstation.tdiversity.get(baseStation = repcap.BaseStation.Default)

The command activates and deactivates signal calculation with transmit diversity (OFF) . To activate transmit diversity, the antenna must be specified whose signals are to be simulated (ANT1 or ANT2) . The diversity scheme is selected using command [:SOURce<hw>]:BB:C2K:BSTation<st>:TDIVersity:MODE.

param baseStation

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bstation’)

return

tdiversity: OFF| ANT1| ANT2 OFF No transmit diversity. ANT1 Calculate and apply the output signal for antenna 1. ANT2 Calculate and apply the output signal for antenna 2.

set(tdiversity: RsSmbv.enums.Cdma2KtxDiv, baseStation=BaseStation.Default) → None

# SCPI: [SOURce<HW>]:BB:C2K:BSTation<ST>:TDIVersity
driver.source.bb.c2K.bstation.tdiversity.set(tdiversity = enums.Cdma2KtxDiv.ANT1, baseStation = repcap.BaseStation.Default)

The command activates and deactivates signal calculation with transmit diversity (OFF) . To activate transmit diversity, the antenna must be specified whose signals are to be simulated (ANT1 or ANT2) . The diversity scheme is selected using command [:SOURce<hw>]:BB:C2K:BSTation<st>:TDIVersity:MODE.

param tdiversity

OFF| ANT1| ANT2 OFF No transmit diversity. ANT1 Calculate and apply the output signal for antenna 1. ANT2 Calculate and apply the output signal for antenna 2.

param baseStation

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bstation’)

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.source.bb.c2K.bstation.tdiversity.clone()

Subgroups

• Mode