Data

SCPI Command :

[SOURce<HW>]:BB:C2K:BSTation<ST>:CGRoup<DI0>:COFFset<CH>:DATA

class DataCls

Data commands group definition. 4 total commands, 3 Subgroups, 1 group commands

get(baseStation=BaseStation.Default, groupNull=GroupNull.Default, offset=Offset.Default) → RsSmbv.enums.DataSourceA

# SCPI: [SOURce<HW>]:BB:C2K:BSTation<ST>:CGRoup<DI0>:COFFset<CH>:DATA
value: enums.DataSourceA = driver.source.bb.c2K.bstation.cgroup.coffset.data.get(baseStation = repcap.BaseStation.Default, groupNull = repcap.GroupNull.Default, offset = repcap.Offset.Default)

The command selects the data source for the specified channel. For the traffic channels, this value is specific for the selected radio configuration. The data source for the power control bits is selected with the command BB:C2K:BST<n>:CGRoup<n>:COFFset<n>:TPC:DATA.

param baseStation

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bstation’)

param groupNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cgroup’)

param offset

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Coffset’)

return

data: ZERO| ONE| PATTern| PN9| PN11| PN15| PN16| PN20| PN21| PN23| DLISt PNxx The pseudo-random sequence generator is used as the data source. Different random sequence lengths can be selected. DLISt A data list is used. The data list is selected with the command :BB:C2K:BSTn:CGRoupn:COFFsetn:DATA:DSEL. ZERO | ONE Internal 0 and 1 data is used. PATTern Internal data is used. The bit pattern for the data is defined by the command :BB:C2K:BST:CGRoup:COFFset:DATA:PATT.

set(data: RsSmbv.enums.DataSourceA, baseStation=BaseStation.Default, groupNull=GroupNull.Default, offset=Offset.Default) → None

# SCPI: [SOURce<HW>]:BB:C2K:BSTation<ST>:CGRoup<DI0>:COFFset<CH>:DATA
driver.source.bb.c2K.bstation.cgroup.coffset.data.set(data = enums.DataSourceA.DLISt, baseStation = repcap.BaseStation.Default, groupNull = repcap.GroupNull.Default, offset = repcap.Offset.Default)

The command selects the data source for the specified channel. For the traffic channels, this value is specific for the selected radio configuration. The data source for the power control bits is selected with the command BB:C2K:BST<n>:CGRoup<n>:COFFset<n>:TPC:DATA.

param data

ZERO| ONE| PATTern| PN9| PN11| PN15| PN16| PN20| PN21| PN23| DLISt PNxx The pseudo-random sequence generator is used as the data source. Different random sequence lengths can be selected. DLISt A data list is used. The data list is selected with the command :BB:C2K:BSTn:CGRoupn:COFFsetn:DATA:DSEL. ZERO | ONE Internal 0 and 1 data is used. PATTern Internal data is used. The bit pattern for the data is defined by the command :BB:C2K:BST:CGRoup:COFFset:DATA:PATT.

param baseStation

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bstation’)

param groupNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cgroup’)

param offset

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Coffset’)

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.source.bb.c2K.bstation.cgroup.coffset.data.clone()

Subgroups

• Dselect
• Pattern
• Rate