Copy

SCPI Commands :

[SOURce<HW>]:BB:C2K:COPY:COFFset
[SOURce<HW>]:BB:C2K:COPY:DESTination
[SOURce<HW>]:BB:C2K:COPY:SOURce

class CopyCls

Copy commands group definition. 4 total commands, 1 Subgroups, 3 group commands

get_coffset() → int

# SCPI: [SOURce<HW>]:BB:C2K:COPY:COFFset
value: int = driver.source.bb.c2K.copy.get_coffset()

The command sets the offset for the Walsh code in the destination base station. The minimum value is 0 (Walsh codes are identical) , the maximum value is 255. This command is only available in the downlink (SOUR:BB:C2K:LINK FORW/DOWN) .

return

coffset: integer Range: 0 to 255

get_destination() → RsSmbv.enums.NumberA

# SCPI: [SOURce<HW>]:BB:C2K:COPY:DESTination
value: enums.NumberA = driver.source.bb.c2K.copy.get_destination()

The command selects the station to which data is to be copied. Whether the data is copied to a base station or a mobile station depends on which transmission direction is selected (command C2K:LINK UP | DOWN) .

return

destination: 1| 2| 3| 4 Range: 1 to 4

get_source() → RsSmbv.enums.NumberA

# SCPI: [SOURce<HW>]:BB:C2K:COPY:SOURce
value: enums.NumberA = driver.source.bb.c2K.copy.get_source()

The command selects the station that has data to be copied. Whether the station copied is a base or mobile station depends on which transmission direction is selected (command C2K:LINK UP | DOWN) .

return

source: 1| 2| 3| 4 Range: 1 to 4

set_coffset(coffset: int) → None

# SCPI: [SOURce<HW>]:BB:C2K:COPY:COFFset
driver.source.bb.c2K.copy.set_coffset(coffset = 1)

The command sets the offset for the Walsh code in the destination base station. The minimum value is 0 (Walsh codes are identical) , the maximum value is 255. This command is only available in the downlink (SOUR:BB:C2K:LINK FORW/DOWN) .

param coffset

integer Range: 0 to 255

set_destination(destination: RsSmbv.enums.NumberA) → None

# SCPI: [SOURce<HW>]:BB:C2K:COPY:DESTination
driver.source.bb.c2K.copy.set_destination(destination = enums.NumberA._1)

The command selects the station to which data is to be copied. Whether the data is copied to a base station or a mobile station depends on which transmission direction is selected (command C2K:LINK UP | DOWN) .

param destination

1| 2| 3| 4 Range: 1 to 4

set_source(source: RsSmbv.enums.NumberA) → None

# SCPI: [SOURce<HW>]:BB:C2K:COPY:SOURce
driver.source.bb.c2K.copy.set_source(source = enums.NumberA._1)

The command selects the station that has data to be copied. Whether the station copied is a base or mobile station depends on which transmission direction is selected (command C2K:LINK UP | DOWN) .

param source

1| 2| 3| 4 Range: 1 to 4

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.source.bb.c2K.copy.clone()

Subgroups

• Execute