Crate

SCPI Commands :

[SOURce<HW>]:BB:C2K:CRATe:VARiation
[SOURce<HW>]:BB:C2K:CRATe

class CrateCls

Crate commands group definition. 2 total commands, 0 Subgroups, 2 group commands

get_value() → RsSmbv.enums.Cdma2KchipRate

# SCPI: [SOURce<HW>]:BB:C2K:CRATe
value: enums.Cdma2KchipRate = driver.source.bb.c2K.crate.get_value()

The command queries the spreading rate. The output chip rate which determines the rate of the spread symbols as is used for signal output can be set with the command SOUR:BB:C2K:CRAT:VAR.

return

crate: R1M2

get_variation() → float

# SCPI: [SOURce<HW>]:BB:C2K:CRATe:VARiation
value: float = driver.source.bb.c2K.crate.get_variation()

Sets the output chip rate. The output chip rate changes the output clock and the modulation bandwidth, as well as the synchronization signals that are output. It does not affect the calculated chip sequence.

return

variation: float Range: 400 to 5E6

set_variation(variation: float) → None

# SCPI: [SOURce<HW>]:BB:C2K:CRATe:VARiation
driver.source.bb.c2K.crate.set_variation(variation = 1.0)

Sets the output chip rate. The output chip rate changes the output clock and the modulation bandwidth, as well as the synchronization signals that are output. It does not affect the calculated chip sequence.

param variation

float Range: 400 to 5E6