Ifactor

SCPI Command :

[SOURce<HW>]:BB:EVDO:USER<ST>:IFACtor

class IfactorCls

Ifactor commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(userIx=UserIx.Default) → int

# SCPI: [SOURce<HW>]:BB:EVDO:USER<ST>:IFACtor
value: int = driver.source.bb.evdo.user.ifactor.get(userIx = repcap.UserIx.Default)

Controls the number of interleave slots used for the selected user on the forward link. Four interleave slots are defined in the 1xEV-DO system. By default, only 1 Interleave slot (Interleave Factor = 1) for an access terminal is configured and transmission to that access terminal every fourth slot is selected. For an interleave factor > 1, packets on multiple interleave slots are sent, increasing the data throughput to the access terminal.

param userIx

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘User’)

return

ifactor: integer Range: 1 to 4

set(ifactor: int, userIx=UserIx.Default) → None

# SCPI: [SOURce<HW>]:BB:EVDO:USER<ST>:IFACtor
driver.source.bb.evdo.user.ifactor.set(ifactor = 1, userIx = repcap.UserIx.Default)

Controls the number of interleave slots used for the selected user on the forward link. Four interleave slots are defined in the 1xEV-DO system. By default, only 1 Interleave slot (Interleave Factor = 1) for an access terminal is configured and transmission to that access terminal every fourth slot is selected. For an interleave factor > 1, packets on multiple interleave slots are sent, increasing the data throughput to the access terminal.

param ifactor

integer Range: 1 to 4

param userIx

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘User’)