Anetwork

SCPI Commands :

[SOURce<HW>]:BB:EVDO:ANETwork:CPMode
[SOURce<HW>]:BB:EVDO:ANETwork:OUCount
[SOURce<HW>]:BB:EVDO:ANETwork:SUBType

class AnetworkCls[source]

Anetwork commands group definition. 14 total commands, 3 Subgroups, 3 group commands

get_cp_mode() → bool[source]

# SCPI: [SOURce<HW>]:BB:EVDO:ANETwork:CPMode
value: bool = driver.source.bb.evdo.anetwork.get_cp_mode()

Enables or disables a special mode within the 1xEV-DO generator. Note: During the special mode, all other parameters do not affect the signal output.

return

cp_mode: 1| ON| 0| OFF

get_ou_count() → int[source]

# SCPI: [SOURce<HW>]:BB:EVDO:ANETwork:OUCount
value: int = driver.source.bb.evdo.anetwork.get_ou_count()

Sets the number of additional users (beyond the four defined users) that appear in the MAC Channel.

return

ou_count: integer Range: 0 to 55 for physical layer subtype 0&1) , 0 to 110 for physical layer subtype 2, 0 to 360 for physical layer subtype 3

get_sub_type() → RsSmbv.enums.EvdoLayerDn[source]

# SCPI: [SOURce<HW>]:BB:EVDO:ANETwork:SUBType
value: enums.EvdoLayerDn = driver.source.bb.evdo.anetwork.get_sub_type()

Selects the physical layer subtype. Note: The physical layer subtype settings can be queried per user.

return

sub_type: S1| S2| S3

set_cp_mode(cp_mode: bool) → None[source]

# SCPI: [SOURce<HW>]:BB:EVDO:ANETwork:CPMode
driver.source.bb.evdo.anetwork.set_cp_mode(cp_mode = False)

Enables or disables a special mode within the 1xEV-DO generator. Note: During the special mode, all other parameters do not affect the signal output.

param cp_mode

1| ON| 0| OFF

set_ou_count(ou_count: int) → None[source]

# SCPI: [SOURce<HW>]:BB:EVDO:ANETwork:OUCount
driver.source.bb.evdo.anetwork.set_ou_count(ou_count = 1)

Sets the number of additional users (beyond the four defined users) that appear in the MAC Channel.

param ou_count

integer Range: 0 to 55 for physical layer subtype 0&1) , 0 to 110 for physical layer subtype 2, 0 to 360 for physical layer subtype 3

set_sub_type(sub_type: RsSmbv.enums.EvdoLayerDn) → None[source]

# SCPI: [SOURce<HW>]:BB:EVDO:ANETwork:SUBType
driver.source.bb.evdo.anetwork.set_sub_type(sub_type = enums.EvdoLayerDn.S1)

Selects the physical layer subtype. Note: The physical layer subtype settings can be queried per user.

param sub_type

S1| S2| S3

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.source.bb.evdo.anetwork.clone()

Subgroups