Gain

SCPI Command :

[SOURce<HW>]:BB:EVDO:TERMinal<ST>:PCHannel:GAIN

class GainCls

Gain commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(terminal=Terminal.Default) → float

# SCPI: [SOURce<HW>]:BB:EVDO:TERMinal<ST>:PCHannel:GAIN
value: float = driver.source.bb.evdo.terminal.pchannel.gain.get(terminal = repcap.Terminal.Default)

Sets the gain of the pilot channel. Gains of other channels are relative to the Pilot Channel power. This setting is used to distinguish the power between access terminals, when more than one access terminal is active.

param terminal

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Terminal’)

return

gain: float Range: -80 to 10 dB

set(gain: float, terminal=Terminal.Default) → None

# SCPI: [SOURce<HW>]:BB:EVDO:TERMinal<ST>:PCHannel:GAIN
driver.source.bb.evdo.terminal.pchannel.gain.set(gain = 1.0, terminal = repcap.Terminal.Default)

Sets the gain of the pilot channel. Gains of other channels are relative to the Pilot Channel power. This setting is used to distinguish the power between access terminals, when more than one access terminal is active.

param gain

float Range: -80 to 10 dB

param terminal

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Terminal’)