Count

SCPI Command :

[SOURce<HW>]:BB:EVDO:TERMinal<ST>:DCHannel:PACKet<CH>:SUBPackets:[COUNt]

class CountCls

Count commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(terminal=Terminal.Default, packet=Packet.Default) → int

# SCPI: [SOURce<HW>]:BB:EVDO:TERMinal<ST>:DCHannel:PACKet<CH>:SUBPackets:[COUNt]
value: int = driver.source.bb.evdo.terminal.dchannel.packet.subPackets.count.get(terminal = repcap.Terminal.Default, packet = repcap.Packet.Default)

(enabled for physical layer subtype 2 and for an access terminal working in traffic mode) Sets the number of subpackets to be sent.

param terminal

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Terminal’)

param packet

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Packet’)

return

count: integer Range: 1 to 4

set(count: int, terminal=Terminal.Default, packet=Packet.Default) → None

# SCPI: [SOURce<HW>]:BB:EVDO:TERMinal<ST>:DCHannel:PACKet<CH>:SUBPackets:[COUNt]
driver.source.bb.evdo.terminal.dchannel.packet.subPackets.count.set(count = 1, terminal = repcap.Terminal.Default, packet = repcap.Packet.Default)

(enabled for physical layer subtype 2 and for an access terminal working in traffic mode) Sets the number of subpackets to be sent.

param count

integer Range: 1 to 4

param terminal

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Terminal’)

param packet

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Packet’)