Gain

SCPI Command :

[SOURce<HW>]:BB:EVDO:TERMinal<ST>:APCHannel:GAIN

class GainCls

Gain commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(terminal=Terminal.Default) → float

# SCPI: [SOURce<HW>]:BB:EVDO:TERMinal<ST>:APCHannel:GAIN
value: float = driver.source.bb.evdo.terminal.apChannel.gain.get(terminal = repcap.Terminal.Default)

(enabled for Physical Layer subtype 2 and for an access terminal working in traffic mode) Sets the gain of the auxiliary pilot channel relative to the data channel power. Note: All other channel gains are specified relative to the pilot power, but the auxiliary pilot gain is specified relative to the data channel power.

param terminal

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Terminal’)

return

gain: float Range: -80 to 30

set(gain: float, terminal=Terminal.Default) → None

# SCPI: [SOURce<HW>]:BB:EVDO:TERMinal<ST>:APCHannel:GAIN
driver.source.bb.evdo.terminal.apChannel.gain.set(gain = 1.0, terminal = repcap.Terminal.Default)

(enabled for Physical Layer subtype 2 and for an access terminal working in traffic mode) Sets the gain of the auxiliary pilot channel relative to the data channel power. Note: All other channel gains are specified relative to the pilot power, but the auxiliary pilot gain is specified relative to the data channel power.

param gain

float Range: -80 to 30

param terminal

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Terminal’)