TypePy

SCPI Command :

[SOURce<HW>]:BB:C2K:BSTation<ST>:CGRoup<DI0>:COFFset<CH>:TYPE

class TypePyCls

TypePy commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(baseStation=BaseStation.Default, groupNull=GroupNull.Default, offset=Offset.Default) → RsSmbv.enums.Cdma2KchanTypeDn

# SCPI: [SOURce<HW>]:BB:C2K:BSTation<ST>:CGRoup<DI0>:COFFset<CH>:TYPE
value: enums.Cdma2KchanTypeDn = driver.source.bb.c2K.bstation.cgroup.coffset.typePy.get(baseStation = repcap.BaseStation.Default, groupNull = repcap.GroupNull.Default, offset = repcap.Offset.Default)

Queries the channel type. The channel type is firmly fixed for channel numbers 0-1 to 0-14 (CGR0:COFF1 to CGR0:COFF14) , i.e. for the special channels (control and packet channels) . The remaining channel numbers are assigned to the individual code channels of the eight possible traffic channels. In this case, the first traffic channel occupies the range 1-1 to 1-8 (CGR1:COFF1 to CGR1:COFF8) , the second occupies the range 2-1 to 2-8 (CGR2:COFF1 to CGR2:COFF8) , etc. Since the type and number of code channels depends on the radio configuration of the channel, the channels x-2 to x-8 are variously occupied. X-1 is always the fundamental channel (F-FCH) of the traffic channel.

param baseStation

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bstation’)

param groupNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cgroup’)

param offset

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Coffset’)

return

type_py: F-PICH| F-SYNC| F-PCH| F-TDPICH| F-APICH| F-ATDPICH| F-BCH| F-QPCH| F-CPCCH| F-CACH| F-CCCH| F-DCCH| F-FCH| F-SCH| F-PDCCH| F-PDCH