Spuncture

SCPI Command :

[SOURce<HW>]:BB:C2K:BSTation<ST>:CGRoup<DI0>:COFFset<CH>:CCODing:SPUNcture

class SpunctureCls[source]

Spuncture commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(baseStation=BaseStation.Default, groupNull=GroupNull.Default, offset=Offset.Default) → RsSmbv.enums.Cdma2KchanCodSymbPunc[source]

# SCPI: [SOURce<HW>]:BB:C2K:BSTation<ST>:CGRoup<DI0>:COFFset<CH>:CCODing:SPUNcture
value: enums.Cdma2KchanCodSymbPunc = driver.source.bb.c2K.bstation.cgroup.coffset.ccoding.spuncture.get(baseStation = repcap.BaseStation.Default, groupNull = repcap.GroupNull.Default, offset = repcap.Offset.Default)

The command queries the symbol puncture rate. This value is only available for channel coding modes ‘Complete’ and ‘Without Interleaving’ (SOURce:BB:C2K:BST<n>:CGRoup<n>:COFFset<n>:CCODing:MODE COMP | NOIN) . For the traffic channels, this value is specific for the selected radio configuration.

param baseStation

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bstation’)

param groupNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cgroup’)

param offset

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Coffset’)

return

spuncture: 8OF24| 1OF5| 1OF9| 4OF12| 2OF18| 2OF6| T2OF18| T4OF12| NONE xOFy a symbol puncture rate of x out of y is used TxOFy a symbol puncture rate of x out of y Turbo is used